I have a 2001 M9000DTC has no power anywhere I think it's is a slow blow 50amp fuse but I can't not find it. Any help would be appreciated I'm not very good with electrical
Repair
- Thread starter boonedawg
- Start date
Read the owners manual, or
Start looking around the starter area, or
Ask a local friend to help you find your fuse blocks.
Start looking around the starter area, or
Ask a local friend to help you find your fuse blocks.
Bmyers
Well-known member
Lifetime Member
Equipment
Grand L3560 with LA805 loader, EA 55" Wicked Grapple, SBX72 BB, LP 1272 mower
Kubota M6800S Workshop Manual (Page 100 of 638) | ManualsLib
www.manualslib.com
I believe the link above will show you (poorly) where the fuse box is located. If not, it is the workshop manual for the M9000, so the info should be in there.
I found mine buried behind the battery on my BX23S. Knowing Kubota, they probably hid yours there also. Took me over 2 hours to look for it, and even the dealer didn't know where it was hidden.
Thanks I have WSM trying to find it in there.Kubota M6800S Workshop Manual (Page 100 of 638) | ManualsLib
I believe the link above will show you (poorly) where the fuse box is located. If not, it is the workshop manual for the M9000, so the info should be in there.
Thanks fellows for all the input it is greatly appreciated. I still haven't found the fuse but tractor decided to start today so I don't know what happened but I will take it lol
Bmyers
Well-known member
Lifetime Member
Equipment
Grand L3560 with LA805 loader, EA 55" Wicked Grapple, SBX72 BB, LP 1272 mower
Well its not working again it started 3 times then back to no power. I put new battery in new cables also cleaned all connections can jump across starter and will turn over but not start. I have head lights and flashers all stuff not tied to switch so I’m thinking it could be the switch. Any thoughts