OK I have to ask if anybody else has a problem removing the FEL on the 2601? I am having a real problem releasing the stand feet. The release will not drop the them, and I have read the book and watched the videos. And the bolt on the left side stand is totaly bent, then them it look like a 1/4 20. This has got me stimmied because I cannot seem to fins any kind of adjustments.
Removing the FEL
- Thread starter skeets
- Start date
Can you post a picture of what you are looking at? By stand feet are you talking about the legs you put down that hold the FEL up while not attached to the tractor?
Agree -- my loader has legs that fold down and are held up by a pin. They lock in place by sliding them over and engaging another pin into a hole on a bracket. That's the easy part of unhooking the loader. I will add this caveat "always put your loader on a very level surface when you detach or you will pay when you try to reattach.
I have made that mistake. Talk about a pain in the butt to re-attach!!!
19thSF
Active member
Lifetime Member
Equipment
B2650, loader, MMM, pallet forks, tooth bar, rear blade, JD 318 w/plow, JD X350
Hey Skeets,
Home Plate is reporting the same kind of issue on a B2301
The thread is Bent Bolt
Orange man
Active member
Equipment
Kubota L2501 LA525 loader , woods prd6000 mower, Land pride RB 1672
If you have a 435 there are lots people having trouble with them. If you look on youtube, several videos on it.