RCK60B23BX RCK60B Mower Deck Metal Step

[ChrisMc]

Hi all, as a newbie to OrangeTractorTalks, I thought I would share this.

I had this metal step made from my design for my BX23S mower RCK60B. I thought some of you may like the part and design. I apologize that I used my own existing orange paint and did not spend the $$ on Kubota paint.

If you want one, the machine shop that made it is Pentz Precision Products, contact Justin at (MOD EDIT: Email removed )

Chris Mc

I noticed that the email was removed by OTT. I guess I will check back incase anybody want to contact Justin and somehow provide his information. Chris

 

[dlsmith]

Hi all, as a newbie to OrangeTractorTalks, I thought I would share this.

I had this metal step made from my design for my BX23S mower RCK60B. I thought some of you may like the part and design. I apologize that I used my own existing orange paint and did not spend the $$ on Kubota paint.

If you want one, the machine shop that made it is Pentz Precision Products, contact Justin at (MOD EDIT: Email removed )

Chris Mc

I did the same thing a couple of years ago. I used a piece of scrap aluminum checker plate and a couple of 1/4" carriage bolts.

 

[ChrisMc]

Very good DL, great minds think alike, Chris