PTO cover

[19thSF]

I am looking for a sleeve (cover) to slide on both of my PTO output shafts on my B2650. I would use a piece of hose, but the end would still be open. The covers used to be available on eparts.com but they are out of stock and have been out a long time.

Anybody have any thoughts.

 

[Jared 756]

I am looking for a sleeve (cover) to slide on both of my PTO output shafts on my B2650. I would use a piece of hose, but the end would still be open. The covers used to be available on eparts.com but they are out of stock and have been out a long time.

Anybody have any thoughts.

Messicks show a PTO shaft cap cover for $8.44.

 

[old and tired]

Shield Parts | Agri Supply

Find power take off parts from Agri Supply®. We have PTO shields and components, as well as dozens of other PTO shaft parts for every need.

www.agrisupply.com

Or google "PTO Shield" for other places to buy...

 

[imnukensc]

Bicycle tire inner tube.

 

[Jared 756]

Shield Parts | Agri Supply

Find power take off parts from Agri Supply®. We have PTO shields and components, as well as dozens of other PTO shaft parts for every need.

www.agrisupply.com

Or google "PTO Shield" for other places to buy...

I think PTO shield may be to broad of a search. Going to get you mostly tube shields for the shaft or gearbox shields. None of the ones on the agri supply link would work for this application

 

[19thSF]

Messicks show a PTO shaft cap cover for $8.44.

Thank you for the reply. Do you happen to have the Messicks part number? I was unable to find it.

 

[19thSF]

Bicycle tire inner tube.

Thank you for the reply. Unless I am not picturing this correctly, wouldn't there still be and open end?

 

[Jared 756]

Thank you for the reply. Do you happen to have the Messicks part number? I was unable to find it.

37410-63112

 

[19thSF]

37410-63112

Thank you for the effort. Messicks doesn't show it as fitting my B2650

 

[Jared 756]

Thank you for the effort. Messicks doesn't show it as fitting my B2650

Yes I did notice that. It fits enough other B series and the shaft are the same generally speaking so it might be worth trying for $9

 

[Jared 756]

Thank you for the effort. Messicks doesn't show it as fitting my B2650

Could also try your local dealer, most of the tractors come in with pto covers on that end up getting thrown away along the PDI process. They may have some floating around

 

[kubotafreak]

31220-25820

 

[mcfarmall]

A guy on YouTube made one from an Orbit sprinkler head. He gutted it, heated it up with a propane torch till it got soft, then shoved it on the stub shaft....conformed right to the spline. Then he installed a plastic ½ NPT pipe plug in the end.

 

[imnukensc]

Thank you for the reply. Unless I am not picturing this correctly, wouldn't there still be and open end?

Well, yeah, but if you cut it long enough, fold it over, and tie wrap or use some wire around it then that problem is pretty easily solved.

 

[19thSF]

Well, yeah, but if you cut it long enough, fold it over, and tie wrap or use some wire around it then that problem is pretty easily solved.

Yup! That would work!

 

[ItBmine]

I got the rear cover with my tractor, but had to make one for the mid PTO. I used rubber hose then found a plastic cap off a brake cleaner or penetrating oil spay can that fit perfect over the hose, then wrapped electrical tape.
Still perfect since 2013.

 

[dirtydeed]

3 pack of condoms

 

[Bmyers]

3 pack of condoms

If you get them lubricated does it help prevent rust too?

 

[dirtydeed]

If you get them lubricated does it help prevent rust too?

I would think so...maybe some ribbed variety for pleasure?

 

[D2Cat]

Thank you for the reply. Unless I am not picturing this correctly, wouldn't there still be and open end?

Tie a knot in the end!