Just picked up an new one today for mx BX 2360. Just asking how to secure the screw downs? Is there a large flat washer only or is there a rubber washer to help make the tabs last better?
New Bonnet
- Thread starter Whatscooking
- Start date
19thSF
Active member
Lifetime Member
Equipment
B2650, loader, MMM, pallet forks, tooth bar, rear blade, JD 318 w/plow, JD X350
Do these help? Needed two pages to capture the complete parts breakout.
Good luck!
Attachments
What is the cover below that called? The plastic wrap around gril.
What precautions can be done to protect those flimsy securing tabs? I have so far gripped it with a large rubber washer under a large flat washer.
And what is the use of the foam pads they sold me with this plastic grill? They don't seal anything so i guess for vibration?
What precautions can be done to protect those flimsy securing tabs? I have so far gripped it with a large rubber washer under a large flat washer.
And what is the use of the foam pads they sold me with this plastic grill? They don't seal anything so i guess for vibration?
19thSF
Active member
Lifetime Member
Equipment
B2650, loader, MMM, pallet forks, tooth bar, rear blade, JD 318 w/plow, JD X350
Here is the link to the Illustrated Parts Manual. You can look up anything that you want to.
Kubota Tractor Corporation - Illustrated Parts List
- K-PAD - Parts Lists - Illustrated Parts Lists - diagrams
19thSF
Active member
Lifetime Member
Equipment
B2650, loader, MMM, pallet forks, tooth bar, rear blade, JD 318 w/plow, JD X350
Yes, is there anything extra i can do to help securing,020. What are the pads 030 and 040 purpose.
Russell King
Well-known member
Lifetime Member
Equipment
L185F, Modern Ag Competitor 4’ shredder, Rhino tiller, rear dirt scoop
See this thread for similar information on what you may want to know
www.orangetractortalks.com
The foam is to seal against a surface to keep dust out or direct air flow to other places or to stop annoying vibrations or noises
BX25D engine cowling
I found the plastic tab under the hood for the cowling mount snapped off under the hold down bolt. I decided to repair it by adding some 16g sheetmetal, sandwiching the plastic mounts on both sides. Hope this holds up. Looks like a branch got up between the flywheel and the small metal shield in...
www.orangetractortalks.com
The foam is to seal against a surface to keep dust out or direct air flow to other places or to stop annoying vibrations or noises