La535 loader hoses

[Orange man]

The dealer got my loader installed on my LX2610, but in seems the bundle of hoses rubs the hood, Any body else have this problem? Can zip tie them away but not sure if they did something wrong. Thanks

 

[Roadworthy]

I know nothing about the LX. My L2501 with LA525 loader has kind of a mesh bag around the hoses near the joystick. There are also some really large cable ties holding things in place. My dealer did a very neat job.

 

[random]

They're just hanging loose? If so, that's not installed right IMO.

Show a pic please.

 

[Orange man]

They are in the protective sleeve but the loader is so narrow not really enough room for them. I will have to zip tie them I guess. Tractor is being delivered Monday or Tuesday and will post a picture then.

 

[tthorkil]

This is not a picture of my tractor, but the hoses on my tractor are similar to the attached picture. Are your tractor's hoses routed on the inside of the loader arms? I am assuming that they are by your description.

 

[Njtool]

Here is my LX2610. I have a cab as well as the load level kit, and a 3rd function installed.
All my hoses are on the outside of the loader. I don’t think I’ve seen them routed on the inside.

I guarantee there will be someone on here that says they are in danger of being snagged on something... blah blah blah... I work in the woods and in brush and I’ve never even come close to snagging something on the hoses.

 

[Orange man]

All the hoses run on the inside of the loader, It's a ROPS model without Swift-tach. Just not very much room on the inside.

 

[Njtool]

All the hoses run on the inside of the loader, It's a ROPS model without Swift-tach. Just not very much room on the inside.

I don’t have swift tach either. I wouldn’t want them, they leak too much

 

[Orange man]

Looks like they run the hoses on the outside with the self leveling kit.

 

[Njtool]

Looks like they run the hoses on the outside with the self leveling kit.

I had my tractor while waiting for the leveling kit. The hoses were outside then too. It was also on the outside at the dealership when I first saw it.

 

[B737]

Interesting....
here are mine, ROPS model, non-swift tach. They arent touching the hood but close, they are run on the inside unlike the photo above. There is a holder keeping them tight to the loader stanchion can be seen in last photo, thick black strap. The metal pole obtusely sticking out is for 3rd function

 

[Orange man]

Mine are run like yours, I think when I get it home I will pull the sleeve off and see if I can get the hoses to lay better. Thanks

 

[Orange man]

This what I have