L48 200 hour filter change

2zl

New member

Equipment
Kubota l48
Dec 13, 2019
29
1
1
Perce,Quebec,Canada
Hi Everyone,
I was just wondering what everyone does when they change the hst and hydraulic filters at the 200 hour mark.
Do you drain your oil? Like the manual directs or can you just change the filters?
 

2zl

New member

Equipment
Kubota l48
Dec 13, 2019
29
1
1
Perce,Quebec,Canada
Thanks, but that seems like a pretty high risk of oil Contamination draining all that oil under a dirty tractor. I am hoping that someone had some experience spinning the filters off without all the oil draining.
 

Roadworthy

Well-known member
Lifetime Member

Equipment
L2501 HST
Aug 17, 2019
1,649
526
113
Benton City, WA
If you're REALLY quick you can swap a filter with minimal fluid loss. I'm not that quick so I connect a shop vac to the oil fill port. The vacuum provides negative pressure and you lose very little fluid beyond what's in the filter itself. You may wish to have a gallon on hand to replace the quart or two you lose.
 
  • Like
Reactions: 1 user

#40Fan

Active member
Jul 21, 2022
291
167
43
USA
Thanks, but that seems like a pretty high risk of oil Contamination draining all that oil under a dirty tractor. I am hoping that someone had some experience spinning the filters off without all the oil draining.
I'm sorry. I thought it was time to change your oil and you were just wanting to change the filters, without doing the change, as the manual suggests.

The suggestion using the vacuum is a good idea to keep from losing too much oil when swapping filters.
 

WoodKutter

Member

Equipment
L4600 John Deere 750, John Deere 420
Apr 15, 2022
95
55
18
Vermont and Northern Maine
Sounds like they're at least 2 low hour L48's here. Nice machine. I would change both filter and oil. UDT2 is not cheap, but compared to HST problems, to me it's an easy decision.
 

2zl

New member

Equipment
Kubota l48
Dec 13, 2019
29
1
1
Perce,Quebec,Canada
Sounds like they're at least 2 low hour L48's here. Nice machine. I would change both filter and oil. UDT2 is not cheap, but compared to HST problems, to me it's an easy decision.
Well mine is not low hours at 3850 but the recommended service for hst oil is every 400 hours with filter changes at the 200 hour mark.
Must be nice to have a low hour one.
Incredible machine, mine still runs like a new one.
 

fried1765

Well-known member

Equipment
Kubota L48 TLB, Ford 1920 FEL, Ford 8N, SCAG Liberty Z, Gravely Pro.
Nov 14, 2019
7,843
5,066
113
Eastham, Ma
Sounds like they're at least 2 low hour L48's here. Nice machine. I would change both filter and oil. UDT2 is not cheap, but compared to HST problems, to me it's an easy decision.
My 2006 L48 TLB has 258 total hours.
I will be 82 this month, so don't know if I will make it to 400 hours.
 
Last edited:
  • Like
Reactions: 1 user