BX23S LED upgrade

i7win7

Well-known member

Equipment
BX2370, B2650 grapple, tree puller, trailer mover, 3 point hoist, mower, tiller
Feb 21, 2020
3,214
3,718
113
Central, IL
These are the magnets i used. Very powerful! I have not had one light move or fall off the ROPS!
Magnet vs tree limb - tree wins every time
 

i7win7

Well-known member

Equipment
BX2370, B2650 grapple, tree puller, trailer mover, 3 point hoist, mower, tiller
Feb 21, 2020
3,214
3,718
113
Central, IL
Your set up seems to be very similar to what I had in mind, just curious where you found the wiring harness and how it wired up, as I'm illiterate when it comes to electric and I am trying to take out as much user error as possible on that front.
Basic electrical info and how to do "the math" to figure your electrical demands can be found here
 

BX23S-1

Active member
May 29, 2017
535
197
43
No where Special
Magnet vs tree limb - tree wins every time
Dont hit the tree limb`s...lol.
I`ve never knocked any of my lights off in over 50yrs on anything.
Would i call it Good Luck? Nahhh, just be careful to not to be stupid.

It dosent matter what you do, whether hard mounted, or by magnet, anything can happen.
But at least magnetically mounted, nothing gets damaged. I have them safety wired. Aint going nowhere.
 

BManFX4

Member

Equipment
BX2380, RCK60B, LandPride RTA1250, CountyLine RC5, Titan BX42S Chipper
Apr 14, 2020
32
8
8
Loudon, TN
I used these in the factory headlight housings. Much brighter light and their LED placement retains the correct pattern.

Auxlight 881 LEDs
 

SRRGC1

Active member

Equipment
BX1870-1, BX23S TLB, RTV XG850, MX5100DT
Jan 6, 2021
208
75
28
Bloomsburg
Have a RTV500, BX1870-1, BX23s. I used the CIIHON LED fog bulbs #881 in all three. Brighter light and replacement. Also #' 889 and 862 are the same bulb I think. And yes, Made in China off Amazon.
 

GreensvilleJay

Well-known member

Equipment
BX23-S,57 A-C D-14,58 A-C D-14, 57 A-C D-14,tiller,cults,Millcreek 25G spreader,
Apr 2, 2019
9,852
4,033
113
Greensville,Ontario,Canada
Still doesn't matter what kind of headlights a BX23S has, the loader w/wo bucket BLOCKS the headlights.......
 

SRRGC1

Active member

Equipment
BX1870-1, BX23S TLB, RTV XG850, MX5100DT
Jan 6, 2021
208
75
28
Bloomsburg
Still doesn't matter what kind of headlights a BX23S has, the loader w/wo bucket BLOCKS the headlights.......
This is true, however should you remove the FEL, better lighting. The whole issue and question posted was what bulb/s to use if changing to LED lights.
 

GreensvilleJay

Well-known member

Equipment
BX23-S,57 A-C D-14,58 A-C D-14, 57 A-C D-14,tiller,cults,Millcreek 25G spreader,
Apr 2, 2019
9,852
4,033
113
Greensville,Ontario,Canada
yes, but he'd be far better off putting the LEDs on the cab he has. Far better lighting with and without loader frame, for same if not cheaper than LED headlights.
 

Trimley

Well-known member
Lifetime Member

Equipment
BX23SLSB-R-1 plus additions
Jul 25, 2023
915
631
93
PNW-WA
Waking a sleeping topic.

🤔It's apparent the FEL is prone to blocking the light.

💤What gets me, is why someone hasn't gotten creative and found a way to resolve it.💤

I apologize if I come over as being a smarty pants, although in a way I am. I have a background in 3D Modeling, design, blueprints, graphics yadda yadda. I've been kicking around the idea of creating a true-to-scale model of my BX23S, which in the 18/23 series is the most feature rich. The others (SCUTs) would be offspring.

The model would allow me to create (and test) my ideas as prototypes in a virtual realty.

I'm not quite there in my head, if this is something I want to persue, but I do have ideas which I feel would go over well.

At this point in time I'm just mumbling.
 
Last edited:

leveraddict

Well-known member

Equipment
2017 BX23S 60" LP BoxBlade 54" mower 60" BackBlade EA 12" 1 bottom plow & Forks
Apr 1, 2019
906
582
93
NEPA
Just cut big holes in the bucket so the light can shine through! Yeah kidding.
You are going to build a true to scale model of your BX23S? THIS I GOTTA SEE! You have the tractor just do mock ups on the real thing! I cant wait to see how much stuff you have hanging off that BX in years to come!
Getting the popcorn! Hehehe!