BX 2370 Snow Blade

[GEPM64]

I'm thinking of putting a snow blade on my BX2370 but only if I can get one that has both Hydraulic lift and angle functions. The one from Kubota states it's only Hydraulic lift and manual angle. I did see one from Johnny Plow that does both. Any thoughts or other suggestions?

Thanks,
Glenn

 

[Iowan]

I'm thinking Kubota has two blades for the BX and at least one has power angel.

 

[Closenough]

BX2763A 60" blade for BX is both hyd up/down and angle. All in about 2k.

 

[GEPM64]

BX2763A 60" blade for BX is both hyd up/down and angle. All in about 2k.

For some reason that doesn't seem to be available in Canada? I called my dealer and he's looking into it for me.

Thanks,
Glenn

 

[RIDETOEAT]

I have been thinking about a front loader QT mounted blade for my new tractor. Could I set this up to disconnect the roll hoses to the blade when the carriage was level and expect it to stay put.. and then use that same roll function coming off the joystick to power angle the new snow blade ??

 

[North Idaho Wolfman]

I have been thinking about a front loader mounted blade for my new tractor. Could I set this up to disconnect the roll hoses to the blade when the carriage was level and expect it to stay put.. and then use that same roll function coming off the joystick to power angle the new snow blade ??

Yes you can do that.

 

[bearskinner]

I'm thinking of putting a snow blade on my BX2370 but only if I can get one that has both Hydraulic lift and angle functions. The one from Kubota states it's only Hydraulic lift and manual angle. I did see one from Johnny Plow that does both. Any thoughts or other suggestions?

Thanks,
Glenn

heres what the hydraulic side to side, power lift, with the quick disconnect shoe looks like. I have seen two on the local Craigslist for $1,100. and $1,200 complete

 

[GEPM64]

heres what the hydraulic side to side, power lift, with the quick disconnect shoe looks like. I have seen two on the local Craigslist for $1,100. and $1,200 complete

That's exactly what I want, but they don't sell that in Canada for some unknown reason.

Regards,
Glenn

 

[bearskinner]

That's exactly what I want, but they don't sell that in Canada for some unknown reason.

Regards,
Glenn

What's funny about that, is its stamped " made in Canada" right on the blade assy. I finally got a chance to use mine today. We got about 8" yesterday morning and the night before. I was amazed how much this little tractor would push in 4wd high! I had snow 3' deep out front, and got it pushed back in the trees as far as possible. Gotta watch the low branches as the ROPS would hit them and dump snow down my neck.

 

[GEPM64]

I can get a blade with hydro lift and manual angle but not both. Go figure!

Glenn,

 

[RIDETOEAT]

Could you just order from a U.S. dealer ??

 

[bearskinner]

Or just drive across the border and put it in the back of your pickup

 

[GEPM64]

Or just drive across the border and put it in the back of your pickup

I'm going doen to Grand Forks ND. On Friday and I'm going to have a look at a dealer to see what the price is.

Thanks,

 

[Leyland]

Stuff like this drives me nuts. I ran into the same issue when I bought my front mount blower, the newer wider/heavier built model isn't available in Canada yet... Available in the USA, but dealers haven't even heard of it up here. So I have the older bx2750d model on my brand new tractor.
Don't get me wrong, nothing wrong with the older unit, but little more width and side mount feet would have been nice to have, esp when u know they are available

 

[rk1475]

I have a L3800 with an Erskine plow. It has the hydraulic setup your looking for.

Perhaps they make a model for your BX 2370

 

[bearskinner]

They make and sell a lot of vehicles in Canada and Mexico that you can't get in the states. Some neat diesels and truck models that you won't see here. Don't know why they do things like that