b7200 pto clutch not working

[Dana]

I have just go my b7200 hydro, back togeather after replacing the head, clutch, preasure plate, throw out bearing and machining for pilot bearing. The good news is the motor runs great, but the clutch does not seem to be working. I was hoping that someone would point me in the right direction.

Oh Ya I just wanted to say this site is great.
Thanks to everyone for their imput.

 

[eserv]

The most common reason that I have seen for a new clutch not releasing
is that the clutch disc is installed backwards binding against the flywheel.
Ed

 

[ipz2222]

In your header you say pto clutch not working, then you say clutch is not working. Clarify. Is the clutch not releasing or not engageing????

 

[Dana]

I took advantage of this nice fall sat and worked on my tactor, I found that it was a linkage adjustment that had to be made. Not as big of a problem as i thought.
Thanks to everyone who helped!

 

[hodge]

Glad you figured it out, and didn't have to redo any of your work. Simple solutions are true blessings!

 

[ipz2222]

What kind of adjustment. Knowing that will help the next guy...

 

[Dana]

It was the linkage on the side of the transmission from the clutch pedal that limits the forks on the throwout bearing.