3301 TnT kit parts list drawings

[animals45]

hey folks , I bought a used TnT kit last spring & there is a leak in the control assy . I have been unable to find the parts list drawing for this setup . In the attached pic to the right of the right control valve there is what looks like some kind on adjustable valve ? It's leaking from this part & I would like to see the parts list so I know what's gonna shoot out & get lost when I remove it to replace a banjo washer . Also what does this part do .
thanks
animals45

 

[North Idaho Wolfman]

Really need the Valve model name and number to give you exact details.

 

[TheOldHokie]

hey folks , I bought a used TnT kit last spring & there is a leak in the control assy . I have been unable to find the parts list drawing for this setup . In the attached pic to the right of the right control valve there is what looks like some kind on adjustable valve ? It's leaking from this part & I would like to see the parts list so I know what's gonna shoot out & get lost when I remove it to replace a banjo washer . Also what does this part do .
thanks
animals45

Looks like you circled the pressure relief valve. It limits the maximum pressure the valve will send to a cylinder. Usually pretty simple devices with a poppet, spring, and some washers inside. Nothing should fly out but make sure you don't drop any of the pieces. That's not a banjo and probably seals with a plain copper crush washer. I assume you have already tried tightening it?

Dan

 

[animals45]

Thanks , yea I already checked & its tight . I was meaning a crush washer like with a banjo fitting , I just couldn't think of the name . I have a assortment of those here , so my plan is to clean everything up at the control valves & then run it for a bit to confirm just where the leaks is . I know its coming from the pressure relief valve just not sure if its coming from the base of the PRV or furthur up on it .
thanks
animals45