Brush hog boom

S Chamblee

New member

Equipment
6 foot tiller, land plane, 6 foot bush hog, 2 row hipper
May 10, 2017
22
0
0
Mississippi
Any of you guys running a FEL mounted brush cutter like this? http://lanesharkusa.com/ Interested in something like this to cut around ponds, fence rows, and to cut back brush on wood lines..
 

SMKK

Member

Equipment
B2650
Aug 22, 2019
109
4
18
Lachine, QC
Any of you guys running a FEL mounted brush cutter like this? http://lanesharkusa.com/ Interested in something like this to cut around ponds, fence rows, and to cut back brush on wood lines..
Check out this Stoney Ridge farm Video channel, he did a couple videos on that unit with the company at his farm, and they go through it pretty fully
https://youtu.be/xUfFX7NLoNo

Probably costs a few bucks but looks pretty cool
 

rjcorazza

Member

Equipment
L4060 HSTC Loader, ZD326, ZD1211
Mar 9, 2016
778
22
18
Hyattstown, MD
I have looked at this mower in the past, and decided on a 3 point verge flail mower that moves out beyond the rear tires, and pivots up 90 deg and down 60 deg or so. Full disclosure.... I haven't bought one yet, but am looking hard at the Peruzzo Fox and Elk 60 inch flails.


Sent from my iPad using Tapatalk Pro
 

S Chamblee

New member

Equipment
6 foot tiller, land plane, 6 foot bush hog, 2 row hipper
May 10, 2017
22
0
0
Mississippi
You will need a HEAVY tractor to use that thing .

SDT
That brought up my next question.. the dealer said you needed a minimum of 9 GPM hydraulic output. Not sure what my tractor is capable of (2017 L4701 not HST)
 

rjcorazza

Member

Equipment
L4060 HSTC Loader, ZD326, ZD1211
Mar 9, 2016
778
22
18
Hyattstown, MD
I'm not a hydraulic guy, but the L4701 lists 7.8 gpm pump capacity. I don't know if that means overall, to operate the hst, or out a rear remote. Regardless, sounds like it needs more flow than the L4701 provides.


Sent from my iPad using Tapatalk Pro
 

SDT

Well-known member

Equipment
multiple and various
Apr 15, 2018
3,084
923
113
SE, IN
That brought up my next question.. the dealer said you needed a minimum of 9 GPM hydraulic output. Not sure what my tractor is capable of (2017 L4701 not HST)
Neither enough tractor nor enough flow.

SDT
 

scdeerslayer

Member

Equipment
MX5200DT
May 23, 2016
434
1
18
SC
I've been looking at the Lane Shark products pretty heavily the last week or so. No way I could buy one now, but just dreaming right now. While the larger model requires a 3,000 lb tractor and 8.5 GPM, the smaller one only requires a 2,000 lb tractor and 5 GPM. Maybe one day I can get one.