This may have been noted previously....... Many here buy a gauge and adapter to plug into a quick connect or tee to check their relief pressure for about $30 or so. Whilst most won't go much further and look into their HST pressures, I thought I'd mention some very cheap kits on ebay for this purpose. I purchased something similar a little while ago, albeit a lot dearer than these kits unfortunately, and I think I added one more low pressure gauge as well, and a couple of other threaded adapters to suit my machine so I could look at a couple of pressures simultaneously. I think my hoses were 2 metres long in the kit. So if any of you are going to go past the main pump relief, or want the flexibility of a gauge and hose setup, have a look at these kits starting at $53 delivered for 2 gauges, 2 hoses, 4 adapters, ~$70 for 3 + 3 + 6
There are many others on ebay, here is just a couple. And you would still need to buy a QC adapter, as well as checking you get threads for your tractor and suitable pressure gauges. YMMV
https://www.ebay.com/itm/272782378540
https://www.ebay.com/itm/272780444979
https://www.ebay.com/itm/182880415492
There are many others on ebay, here is just a couple. And you would still need to buy a QC adapter, as well as checking you get threads for your tractor and suitable pressure gauges. YMMV
https://www.ebay.com/itm/272782378540
https://www.ebay.com/itm/272780444979
https://www.ebay.com/itm/182880415492
Last edited: