Helpful steering box rebuild video

divebobber

New member

Equipment
Kubota B7200 with 48" B1640 front loader and 42" Gannon Box scraper
Mar 27, 2015
7
0
0
Pleasant Hill, California
I have my B7200 steering box apart and was just going to put it together. I was finding that the explanation of how to "time" the sector shaft gear to the steering ball-nut assembly found in the steering box rebuild article to be less than clear. With a little YouTube research, I found this video explanation by Hoye Tractor to be very helpful. Even though he does the work on a Yanmar tractor, pretty much everything's the same as on the Kubota. Here's the link for part 2 of a two part series. https://www.youtube.com/watch?v=-m6xrP3VBxs

Hopefully this will help anyone else experiencing the same frustration I was having.
 

DaveB6200

New member
Lifetime Member

Equipment
B6200 with sloppy worn FEL.
Apr 3, 2015
64
0
0
Cromwell, Connecticut
I have my B7200 steering box apart and was just going to put it together. I was finding that the explanation of how to "time" the sector shaft gear to the steering ball-nut assembly found in the steering box rebuild article to be less than clear. With a little YouTube research, I found this video explanation by Hoye Tractor to be very helpful. Even though he does the work on a Yanmar tractor, pretty much everything's the same as on the Kubota. Here's the link for part 2 of a two part series. https://www.youtube.com/watch?v=-m6xrP3VBxs

Hopefully this will help anyone else experiencing the same frustration I was having.

Thanks Divebobber!!!

This will more than likely be very helpful to me this weekend. However I did not see any "shims" that he spoke of. Any idea where the shims come into play?

Thanks Again!