Hello Folks,
Unbolted every bolt possible but still no movement in the gearbox see below fotos !
As the 6 tooths of I dont know what name the gear is are broken
Can someone please give some advice what the next step is to get the gearbox separated from the behind bridge as I found guy who have some used gearboxes and want to take this with me to be sure I have the right one its a Kubota B7001 and he claims to have a B6001 which would fit.
Yes changing the defect gears is also possible but I dont know the names and first I have to see that I can get them loosened.
Btw I found all the 6 tooths and some grinded metal with a magnet after blowing with air in the gearbox !
Unbolted every bolt possible but still no movement in the gearbox see below fotos !
As the 6 tooths of I dont know what name the gear is are broken
Can someone please give some advice what the next step is to get the gearbox separated from the behind bridge as I found guy who have some used gearboxes and want to take this with me to be sure I have the right one its a Kubota B7001 and he claims to have a B6001 which would fit.
Yes changing the defect gears is also possible but I dont know the names and first I have to see that I can get them loosened.
Btw I found all the 6 tooths and some grinded metal with a magnet after blowing with air in the gearbox !
Attachments
-
97.2 KB Views: 1,003
-
74.1 KB Views: 346
-
89.7 KB Views: 585
-
104.1 KB Views: 368
-
106.9 KB Views: 384
Last edited: