Go Back   OrangeTractorTalks - Everything Kubota > Kubota Talk > Service, Repair & Maintenance

Service, Repair & Maintenance Offer your Kubota service advice, repair procedures or maintenance tips. Have a service related question? Post here.

Thread Tools Display Modes
Old 03-30-2015   #1
Jim L.
4th Yr. Apprentice
Join Date: Jun 2014
Location: Texas
Posts: 574
Default Help with hydraulic rear remote

Looking for advice on hydraulics.

What I have is an L3800 with a rear remote. Two connects, Pioneer 4050-3P, 3/8". 6.3 gpm available. Valve open spool, no detents.

What I would like to do is to run a hydraulic tool, essentially a hydraulic motor, max allowable pressure of 2000 psi, and it needs to run in only one direction - reverse pressure will probably blow it.

So one port will be the pressure port, the other the return port, controlled by the handle on the remote.

1) Need a pressure reducer from 2300 to 2000 psi.
2) One-way flow enforcer to keep from blowing tool.

Could be set up with cross-over relief valve and check valve as part of extension hoses set. Better ideas such as cross-over valve with integral check valve, or inline flow control? Your ideas welcome.

Last edited by Jim L.; 03-30-2015 at 04:53 PM. Reason: Port is 3/8"
Jim L. is offline   Reply With Quote
Sponsored Links  

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -8. The time now is 11:47 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.