L2850 V1702 di > V2203 di conversion

Wild and Free

New member

Equipment
B2150 HSD w/Case L340 fel 68" quicktach bkt, 60" jinma snowblower, box scraper
Oct 25, 2012
390
1
0
North Dakota
Here is the near complete project just installing the loader with help from the B2150.

.



Sent from my iPhone using Tapatalk
 

Wild and Free

New member

Equipment
B2150 HSD w/Case L340 fel 68" quicktach bkt, 60" jinma snowblower, box scraper
Oct 25, 2012
390
1
0
North Dakota
Thanks Darrell.
Not sure if I mentioned it or not but since the new engine had no predrilled port for the mechanical fuel transfer pump and I didn't feel like trying to drill out a hole that big in the boss of the block I opted for an electric fuel transfer pump from Napa. You can see it in the video. I mounted it to an existing bolt hole on top of the intake manifold and it works awesome. Used a fuse tap and spaded into the shutdown solenoid fuse which is hot when the key is turned on and located behind the radiator so only needed about a foot of wire to power it up. It was relocated a bit from what is seen in the video during the wiring and hose reroute to refine and clean up the look a bit just forgot to take a finished pic of it after the fact.
 

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
28,286
4,853
113
Sandpoint, ID
Do you think if your tractor would have been a d1703 it would of been hard to swap...

Sent from my XT1254 using Tapatalk
Yes it would be hard as the V2203 is a whole piston length longer.