Just had a call from my orange dealer.
They have just fitted the factory rear remote kit to a new BX23S (80 series) and if I wanted to come down and take a look it will be shipping out thu next week.
What they said was they used the rear remote kit from the BX2380.
Everything fits except for the outlets.
IE the spool and handles all fit as per the 2380.
The issue was the coupling mount and hard lines interfere with the seat.
What the have done is mad up flexible lines to replace the hard lines and mount the couplets on the outside of the ROPS.
Im heading down there early next week and will take some pics.
I have read reports of the BH frame support interfering with the spool mounting but this no longer seems to be the case.
I asked them if the had to modify the frame support and the answer was no.
It is possible we have a slightly different frame support here in OZ as out BX23S is a BX23S-AU model. I thought the difference was we got a factory 4in1 bucket but that might not be the case.
While im there I will get the part numbers for the kit the used and the frame support so you can compare the differences in other markets.
They have just fitted the factory rear remote kit to a new BX23S (80 series) and if I wanted to come down and take a look it will be shipping out thu next week.
What they said was they used the rear remote kit from the BX2380.
Everything fits except for the outlets.
IE the spool and handles all fit as per the 2380.
The issue was the coupling mount and hard lines interfere with the seat.
What the have done is mad up flexible lines to replace the hard lines and mount the couplets on the outside of the ROPS.
Im heading down there early next week and will take some pics.
I have read reports of the BH frame support interfering with the spool mounting but this no longer seems to be the case.
I asked them if the had to modify the frame support and the answer was no.
It is possible we have a slightly different frame support here in OZ as out BX23S is a BX23S-AU model. I thought the difference was we got a factory 4in1 bucket but that might not be the case.
While im there I will get the part numbers for the kit the used and the frame support so you can compare the differences in other markets.