Search results

Thanks. I am thinking you are right. I went back and tried a few more times. The last try it ran much longer and showed me that my ratchet straps holding it down weren't up to the task. It stopped when I turned the key off. I will figure out a better hold down before I try again. Chris

I put it back together. The pump was clean and the rack moved freely. It starts (with the glow plugs) but will only run for a few seconds. There is fuel coming out of the return line (electric pump). I cracked the fittings at the injectors and there is fuel to all the injectors. Could there be...

Here is an update on this engine. I pulled the injection pump and the rack was indeed seized. Also, the roller lifter for cylinder 1 was very hard to push in with my thumb and slow to come back out. The other 2 lifters were fine. The engine internals looked very good and clean. Rather than take...

The id sticker says D722 ES and that it meets 2005 emissions standards. It seems like a nice little engine. Carrier (Transcold) adds an aluminum 8 litre oil pan and a bigger oil filter. It also has a really nice fuel filter. I'm in Canada too. Other coast. I will look more online for info on...

I tried that this afternoon. Lift pump running and cranking the engine. Sometimes there were a few more drops of fuel. I ran the lift pump for several hours and tried cranking the engine every hour or so. Still no fuel at the injectors. Possibly the rack is stuck in the closed position from...

I have a 2005 D722 that came from a Carrier reefer unit. It seems to be in good shape. It has sat for at least 10 years. I put fresh oil and filter in it and added an electric fuel pump and some wiring to control the two solenoids that it has. The first solenoid controls the shut down and the...

Hi, I joined this site a while ago but this is my first post. I have a Kubota RG15 tracked dumper. It has a 1 cylinder 10 hp air cooled diesel and a transmission (belt driven from the engine) with a hydraulic pump in the top of the transmission. I have the parts manual in Japanese but no other...