Search results

Thank you for that info.

It's off a G1800S and needing some parts: 54" wide, probably RC54 or similar model number. There are several 54" decks but I can't find a photo exactly like mine on the internet. I need the exact model number, there is no visible ID plate unless it's under the black grease. I thank the...

Yup, it definitely is positive camber. I'm glad to read that it's normal. Thank you all.

Yes, mine has the retainer ring on each bearing. I finally got the wheel off! A small sledge hammer against a block of wood finally loosened it. Kroil penetrant may have helped. Oddly, the other front rim had two holes 180 degrees apart, close to the hub, as if meant for puller bolts. Though...

I sprayed the axle with Kroil and hammered the back of the wheel, but it's stuck solidly. The rust is under and between the bearings, unreachable with sandpaper. I sprayed the axle with Kroil, hammering the back of the wheel produced no movement.

Okay, the other tractor site had some members who used BFH (very large hammer) and a block of wood, pounding on the back side of the rim. If anyone here has another suggestion please tell. One thought I had was to use dry ice to shrink the axle whilst heating up the wheel hub with a heat gun...

My G1800S front tires are cracked, I want to pour in FlatOut to seal them. Regardless of my reasons, how do I pull the wheels off the axles? I don't want to pound on the axle tip and round it over, making removal impossible. I searched the internet and this site is my last hope. Please and thank...

Yes, The G1800S is the only Kubota that I have. I just now looked at a PDF manual for the tractor and indeed it shows the wheels tilted inwards at the bottom. I find that odd since tilted outwards would make more sense, especially when turning sharply, but I am not the Kubota engineer who...

Hi, new member here. The front tires are closer to each other at the bottom than at the top (camber, I believe) and when I turn sharply, the outer tire looks like it wants to tuck under. I bought it used, is it possible the axle spindles are bent in from hitting curbs, etc, or is this camber...