Search results

Changing my mind on this....it is definitely necessary to have a pinned connection which can't come loose. Not so much for support, but it keep it from moving - utilizing the hand-cranked T-bolt to fix the frame to the tractor is not sufficient. Cleaning up after a bit of an icy snow...

I'm considering it - that was definitely on my initial plan, but I'm not really sure it is necessary. It certainly looks like it is necessary, given how far out the thing is cantilevered, but it is really supported quite well by the front bumper. But, as you indicate, it wouldn't be too...

Hi all, Got this done just before the snow last weekend...so I was able to try it out. Only 4", but a good practice run. Overall the construction is pretty simple, and it seems to work fine: It is 5/16 plate on both ends, with 3x2 pipe (3/16" wall) as the standoffs. The plate is longer...

I've driven further for less...the long-drive-for-junk is a fun activity. Overall I don't disagree with your point, but I have yet to see the parts I need. I've seen a couple of the wrong ones, and one without any shafts. I'm hoping to spend some time with it soon, but perhaps not before the...

I don't disagree, and it was my original escape plan, but like everything - the devil is in the details. I don't think that finding the right combination of sub-frame + PTO shaft will prove that easy. I've done some searching, and didn't come up with anything. Quite a few ads over time...

I changed direction on this, and picked up a much newer, but still not-for-my-tractor, BX5450. I was concerned about the price of nearly every replacement part on the 15+ y/o tired blower. So I'm going to see about getting the B2733 from a B2320 to hang from the bottom of my BX24. Same...

Hi all, I just picked up a BX5450 snow blower from a B2320, where it had a B2733 quick-attach and B2788 Mid-PTO kit. My goal is to put it on a BX24. I was aware that the BX24 requires the B2751 and B2753, but the price was worth the risk. Having spent way to much time trying to figure out...

After getting your description of "25mm involute spline", I figured that would be the key to success on the web, but it didn't really help. I had a brief bit of excitement when McMaster had some 25mm spline, but again on 6 tooth. Lack of detail really seems to be the way the...

Hi all, I would like to convert a B2733 to work on a BX24. I was wondering if anyone could provide measurements for the distance to the ground for the bottom of the quick-attach rails and/or the height of the flipper when the bottom is level. Specifically, these two measurements: I would...

Thanks for the note...seems reasonable given the origin of the tractor. Unfortunately, a quick search with that specification doesn't provide many hits on anything 10spline.

I was hoping that it might go into the inbox of the individual, and spark a reply....but I did do some more research, and discovered that doing "driveshaft research" on the internet is a real pain! It is easy to find things that look like they will work, but with not enough specs to confirm...

Hi - Did you ever confirm that the Weasler was an appropriate replacement? I'm considering fixing up a similar blower, but having a bit of shock regarding the prices of the individual components. Thanks, Don

I just checked it out, and everything is there, include the subframe. The only concern I have is that the mid-PTO output from the 7510 and BX24 are the same size (I think so). I believe that the conversion of the sub-frame shouldn't be too hard. It seems like it will get pretty low under...

Hi all, Does anyone know if the output on the mid-PTO for the 7510 and BX24 are the same? They both have 10 splines, and I have a measurement of the BX as be just shy of 1" in diameter, but I am unable to find the specs anywhere. Thanks, Don

It does have the front driveshaft and mid, but I'm not clear if it has the fixed shaft which is mounted to the sub-frame (where the mid and front pto shafts connect). The front frame mount seems pretty straight forward (I can find pics of that), but the pillow-block/drive shaft routing item...

Hi - I am consider about picking up a B2660 blower only for a BX24, and wondering about fabbing up the mounting and PTO drive. I've been trying to find pictures to determine what is required. Is it just the case of putting together a mount on the front frame for the actual blower (so it can...