Search results

  1. S

    Bush Hog for L4060

    So the tractor is rated at 2760lbs at 24" and the mx6 weights 1041, so i feel confident on either one in regards to weight. My bigger concern is the PTO speed for the MX6. A friend of mine has one of these with an M series tractor (roughly 45 pto HP) and he was telling me how it drags his...
  2. S

    Bush Hog for L4060

    Morning all, I am in search of a new bush hog and was wondering if anyone has had any luck with the JD mx6? I know, I know, wrong manufacturer but I can get it at a decent price. My concerns are: - Double the weight of my old one - PTO Hp is close to the required PTO HP for this bush hog. I...
  3. S

    M7-151 A/C question

    Yep, starting over. Ordered everything today and going to go thru it this weekend. Compressor/dryer/evap/expansion valve/ etc...
  4. S

    M7-151 A/C question

    I ordered a replacement dryer and expansion valve. I'll see what i see when i open her up, again...
  5. S

    M7-151 A/C question

    10/4 on the dryer. I have had a fair amount of success without replacing the dryer, but there is always a first. I unplugged the compressor clutch to see if there was power going to it to engage and during the 10 minutes of running and the pressures staying at 100, the pressure switch never...
  6. S

    M7-151 A/C question

    Yep all of those processes were done to the correct specs, other than the dryer. The pressure reading are with the compressor NOT running. Which, is more than likely, from the low pressure switch circuit being open. Just seems odd to me that it ran fine for a few weeks without issue, and now...
  7. S

    M7-151 A/C question

    Morning all, working on my neighbors M7-151, A/C quit. Went thru all of the diagnostics and found the compressor to be bad. So replaced the compressor and the tractor blew cold air for about 2 weeks. Now, the Low pressure and High Pressure read 100psi on both and the compressor won't kick on...
  8. S

    Skid steer auger

    Does anyone know what the gpm is on the Thanks for the help!
  9. S

    Skid steer auger

    Does anyone know what the hydraulic gpm is on the setup on my tractor?
  10. S

    Skid steer auger

    Just looking to rent one for a weekend
  11. S

    Skid steer auger

    New guy here, can someone tell me if I can run a skid steer auger on my L4060 with a L2265 3rd valve? I want to make sure that I won’t overheat the hydraulics on the tractor. thanks!
Top Bottom