Search results

I can start my L3301 standing next to it. I don't need to be on the seat. The seat switch does work if I try to press a pedal while off the seat, or if I stand to see where the forks are pointing out front. So, I don't believe the seat switch should affect it.

with the Kubota insurance my total financed was 18,100, we divided that by 60 and that was/is my payment. If the amount borrowed divided by 84 ( in this case) is less than what you are paying then something is not adding up.

Are your payments more than 268 a month. When I bought my L3301 it was 21,100 out the door, I put 3,000 down, and my payments are 301 a month. It was pretty simple.

I bought a L3301 HST with a loader, and a 6 foot brush hog last year for 20,100 out the door. with 0% financing. I'd say you are doing pretty well. I'm 6'4" and 280 and can spend hours on this with no issues. Absolutely love mine!

Had the same on my 3301, I was told it derates the engine a bit while the computer sees that code. They came out and picked my tractor after I brought it to them and they just erased the code and gave it back without addressing the issue.

Try just driving the tractor for 20-30 minutes to see if maybe the pump is over working or the brushhog isn't bogging it down.

Remember when you have a 2wd if you are using a front end loader the more you load in the bucket the less weight is on the rear wheels. That can take away a lot of usefulness for you. Just something else to consider.

27-2800 for mine!!

Back to the original post... The "regen" is not a big deal. Every 20 hours or so I get a flashing light and if I'm not running in a high rpm range I bring the rpms up until the light goes off ( usually about 2500) let it sit running for about 10-15 minutes, come back, drop the revs down and the...

Took me less than an hour. Filters are about 125+ oil= maybe 200 in parts. If you can do an oil change in your car you can do this.

12 bucks for a can of undercoating or sound deadening from Autozone/ Discount etc. Will also help reflect more heat.

My 2015 L3301 HST 4x4, quick detach FEL, and 1260 LandPride was 20,400. actually cheaper then the Mahindra and LS tractors I looked at first thinking I couldn't afford a Kubota. lol

L3301 HST 66 hours clearing land for a shop, building a small road/path Had a CEL and code for a crank position sensor, brought back to dealer, they erased and said no issue. I inquired about reflash bulletin and they told me no worries. Called me up 2 days after I got it back and said they were...

Same thing on my L3301. I bent the bracket like previously stated and it seemed to help.

I just did my 50 hr. yesterday then ran it for 3 hours with no issues. most of my neighbors use Amsoil in theirs with no problems.

My L3301 will make an occasional pop during regen. Mine did it at 20 and 44 hours. Basically they are dumping raw fuel in the cat during the regen cycle, building a ton of heat to burn off the buildup.

2015 L3301HST with 525 loader, and 60" brush hog was 20,400 out the door. Personally a 25 seems a bit weak for a back hoe. BUT, I am no expert!! Most people tried to talk me out of the back hoe as you can buy a used one fairly cheap that will really dig. My .02 cents. Your mileage may vary. Not...

0606 - PCM Processor Fault. It basically means that the PCM/ECM (powertrain/engine control module) has detected an internal integrity fault in the PCM. From the people at Kubota I spoke with. The Kubota engine codes match the automotive codes.

Just got a L3301 with FEL and a 5 foot brush hog. it was $20,400 delivered. It was only 1600 more than the smaller one. One question is how big/tall are you? I'm 6'4" and felt a lot more comfortable on the 33 than the smaller unit. I have about 60 hours on it in the last 6 months and absolutely...

Brought the tractor to the dealer last Wednesday, picked it up on Friday. They told me everything was good to go. Tractor did not need an update. They erased the code and it did not come back on. Used the tractor Sunday for 3 hours, no issues ran fine. Fast forward to today, Monday, got a call...