Search results

hello again: I did measure to the top of the rims as suggested. I believe the issues is in the QC of the tire manufacturer. I believe the tires are different outside diameter. I dropped the "problem" (right side) tire to 15lbs. I then leveled the tractor by lowering the pressure in the left...

good point. I will do that

problem mostly figured out Hello again: I think I got it mostly sorted out. Thanks for the helpful comments goes to "D2Cat " and "North Idaho Wolfman". I did as suggested and put a straight edge on the top of the ROPS, and other frame related parallel points. The frames was out by 1/2 - 3/4"...

Okay: I know what I am going to be doing tomorrow. I will report back after I get a chance to check out the rear end. Thanks for all the help.

hello again: Thank you for all the helpful hints. I did crawl underneath and the frame does not appear to have any wrinkles or signs of a bend, that coupled with the review I did with the guys at the frame shop tell me it is unlikely bent, so I am moving away from that as the problem. I will...

Hello D2Cat: Well you are absolutely correct. I just got back from the frame shop. That was an interesting adventure. Couple of nice, funny guys. Their comment "no way you could bend that frame". We made some measurements and concluded there is a little slop but the frame is not bent or twisted...

hello Henro: Good points. Yes the mowing deck also gives a bit of a "stripped tilted hair cut" to the yard. I guess it is a bit of a unique situation. Like most others I do not have a lot of $$ to throw at it. But it is all I have so I am hoping to get it sorted out. The auto body frame shop...

Hello d2cat: I must have been incomplete in my description. The bend is not in the loader. The shop took the loader off and checked the chassis frame. That is where the bend is. I was just looking at it, and it is really well built. It must have been some big time force to bend the frame. I...

Hello first post on the forum: I bought a bx1800 used a few years ago. I have been using it for general yard work with the la211 loader. As I am getting used to the tractor I noticed the blade is wearing out more on the right than the left. I checked the tire pressure and did some measurements...