Search results

There are many different Kubota examples of the exact same filter being used on the diesel and petrol versions of their machines. The filter on my G series is also used on 160 different models including both diesel and petrol garden tractors, RTVs, and Zero Turns. In some cases its even used as...

Yes, most diesel filters are larger than the corresponding petrol filter to increase filter capacity. For example the filter on a twin turbo BMW 335D diesel is almost twice the size of the filter on a the twin turbo petrol version of that engine. They are carttidge filters and its pretty...

This thread is about engine oil filters 🤔🤔 Hydrauliv filters come in two basic types. Output side filters operate at thousands of pounds of pressure. Suction side filters operate at just a few pounds of negative pressure Dan

You are olanning on a DIY guide for others but you are over complicating things with this insistence on using pipe fittings.. Its a low pressure line. Cut the male pipe end off that hose and use a clamp. Better yet, as I said in an earlier post about using that return scrap the high pressure...

While you can find differences in filter size and construction I believe thats marketing hype. For example the genuine OEM filter on my G2160 (diesel) and G2460 (petrol) are the same. Dan

No difference. Dan

Keep it simple - one tee and three clamps!

Everthing in my house and shop is liquid propane gas (LPG) and has been for 35 years. Cheaper than electric resistance. I own the 1000 gallon underground tank by the house and the gss company owns the 300 gallon above ground by the shop. Plan is to bury another 500 gallon tank to replace that. Dan

Hey man, get with the program. If it aint broke fix it until it is :oops: Dan

If you think you have lost loader lifting power buy a pressure gsuge and hook it to the lift port on your loader valve Then move the joystick to lift position, hold it there, and read pressure. If its at or near specification the loss would be in the cylinders. https://a.co/d/55DK6H9 Dan

Breakfast of Champions Strong black coffee and pecan pie. Nothing like a sugar abetted caffein high to kick start the day

I am downsizing to 16 pounders this year.

Unit heaters are made for this purpose and are cheap and easy to install. I am about to install a 125K Modine as replacement for an older Sterling with a cracked heat exchanger. Hang it from the overhead and run 3' of sidewall vent pipe - done...

First tranche of pies done. More to come.

A lot depends on the pump. Some pumps are designed to be rebuildable and others are not. Rebuildable pumps typically have some form of sacrificial wear plates that can be easily replaced In the case of this pump the only parts available are the seals and there are no wear plates although the...

When you roach the transmission because a stick ripped a line loose and you lost all the oil the cost/benefit will be abundantly clear. Dan

I could use that!. Might want to consider making the mounting tube telescoping so you can move it out and in a few feet. Dan

2x the smirk. Dan

If you are talking about KTAC its way more than "service" insurance. Dan

Well dont plan on rebuilding the pump. Dan