Search results

Got to ask this , what is a crimper?

I took a look at a picture of your mower. If you put a pin in the clevis hitch pointing toward the center the arms would be more perpendicular to the rear axle thus they would move the mower away from the tires. A second question. Are you setting the stabilizer bars correctly? If the mower is...

A quick attach hitch or Pat's will set the mower back 3-4 inches. Recheck the PTO length to make sure it is long enough after the adjustment.

How do you know the fuel system is good? When was the last time you changed the fuel filter? Air filter clean? Then answer Dave's questions. Change the fuel filter, even if it "looks good". A lot of times the problem with the fuel filter is not visible to the eye.

While it is nice and "new" place an ad for it and upgrade to a trailer that is a little longer. I am sure you would make money on the redo. Nice work.

Did the front end get a little light as you are going up the hill? I have never used a ZT but it seams like driving up a steep hill does not sound like a great idea. Stopping the mower as you go down backwards does not look like something you want to do either. I load some equipment on my...

I think there are a lot of crimes that punishment would be good for.

Could you fit something like this with a little give in it...

As I stated before load tires help but they are not enough to correctly ballast the tractor. The following video will help explain the reason the 3 point ballast is required. In real life the larger tractor owners ignore the rear ballast on the 3 point but that does not mean they should.

Loaded tires are not a good ballast for the FEL but they will improve the stability of the tractor. . Loaded tires do nothing to remove the load from the front axle. In transferring the weight to the rear axle you gain better control of the brakes and reduces the wear and tear of the front...

I would run a drill bit in the hole where the shear bolt goes in order to clean it up. Secure the mower to a tree. Wrap a chain around the yoke and gently pull on the chain with a come along. Touch the backside of the yoke with a chipping hammer. Should come apart.

Be careful with the strap across the steps. I know when I, at 325 pounds, step upon my L2501 the step flexes a great deal. I would think that there are better options to tiedown the middle strap. There are holes on my tractor's loader frame that will let you place a small clevis on the loader...

I have hauled several tractors for many different people and dealers. I would look where the drawbar goes through the supporting frame at the rear of the trailer. Often the gap were the drawbar goes is large enough to put the hook on your chain through, Loop the hook back around and hook it to...

I grew up in SE Ohio. My brother worked at the local Wheel Horse dealer. Most of the tractors that were sold went out the door with bar also know as ag tires that were loaded. Clay hills are not conducive to turf tires. Small industrial tires where not common back then either. So I would extend...

I am sure that your safety is more important then your grass. Load the rear tires. If the wheels will allow wheel weights I would add them as well. Anytime you are using the FEL you need to have a weight hanging off the 3 point hitch. Also continue to use the 4 x 4 as long as you are not on...

Your hooks look to be fine. They are shallow and might allow the chain to come off in an accident. The solution is easy, cross the chain under the frame to the opposite side of the trailer. This makes the chain pull into the throat of the hook and less likely to come off. The second thought...

To anyone interested: Check this one about 4:50

I have over 1,000,000 miles of dragging a trailer across the state of Florida. The closest thing I’ve ever had happened to me was witnessed by a state trooper as he was writing a ticket. The front tire of my dually blew out at 75 miles an hour. I was in the passing lane to avoid the trooper when...

Mcmix i’m glad to hear you to take such care in hooking up your trailers. But all the care in the world will not prevent an accident from happening. The chains crossed underneath the hitch prevent the hitch from dropping down into the ground and may allow the tow vehicle to pull the trailer...

You need to fight the ticket as it was issued incorrectly. I drive a GMC 3500 GVW of 11400, a Big Tex trailer with a GVW of 14,500. Total of 25,9000 pounds. No CDL and I have been DOTed several times without any problems. If the combined weight is less then 26,001 then the CDL is not required...