Search results

While I had the shroud off of the engine fixing my fuel issue, I attempted to tie down the air filter that the mount has broken multiple times. When the tractor was new, the mount broke in less than 20 hours from the engine vibration. The dealer gave me a replacement that also broke, and then...

On Sunday, my BX22 died suddenly, and I assumed that I was out of fuel, since the fuel gauge has never been accurate. I put fuel into the tank, and cranked for about a minute, but it wouldn't catch. I slid under the tractor and unplugged the fuel pump and then reinstalled the connector, and I...

Today, I installed the BX8064 weight bracket on the front of my BX22. I mounted a BL8060 55# weight on it, and proceeded to look through my nut and bolt cabinet for a bolt that will hold the weight to the bracket. Kubota makes a BL8062 bolt kit for it, but at $6.00 per kit, and needing 5 of...

What size suitcase weight does the Kubota BX22 use. I know that there was a separate bracket for the weights, and I do have a drawing of it somewhere. I am going to need the front weights when I start using the rototiller. If I find the correct weights, I will build the bracket. thanks.. Dusty

Birthday, Anniversary, prayers, death notice, etc. Forum or sub forum to the Off Topic. Also, has a "Thanks" icon ever been considered? Lots of VBulletin forums use it to than those that make useful posts.

I have been following the thread about filling the ROPS to lessen the hydrostatic transmission whine, and it started me thinking about what this "whine" is telling us. How much whine should the hydrostat make, and when is the whine indicating an imminent failure? My BX22 with about 775 hours...

I am going to be shopping for some used weights, and was wondering what I should pay if I were to come across some suitcase weights. In the past, I have seen some yellow & green JD as well as orange Kubota weights, but at the time, I wasn't in the market. What would be a reasonable or fair...

What are you getting your significant other (all politically correct terms in use) for the present or upcoming religious holiday celebration? What got me thinking about this was this post in the joke thread. Now, I would like to show you what I have gotten for my "significant other" however...

I recently came across this Messicks Video (https://www.youtube.com/watch?v=BtNWmybTa50) about "Secondary or Safety Air Filters on Kubota Engines. Specific to BX and Standard L-Series", and I am very familiar with them, since my Vermeer Chipper uses the same type of filtering, but with a larger...

Searched the forums for information, and haven't found any recommendations. I even tried the site that was suggested on the thread about the B7100 Seat source, and that company doesn't have a seat listed for the BX22, and their website has limited listings for the BX tractors.

I have a rear remote valve on my BX22, which is Kubota part number 70000-02619 that has stopped working. A new one is $312 from Kubota. This is a double acting single lever valve. My question is can this valve be added to or expanded to make it have 2 levers to control 2 cylinders? I have...

Need part of the BX K-Connect Hitch that mounts on the front of the tractor itself. Have all the rest of the parts that were attached to the hitch itself. Purchased a used snow blower and the hitch, but the parts that were mounted on the tractor were not with it.

Been thinking about making some drift cutters for when we get really deep snow. I used to plow with the storm, but now I rather just go out after it is finished snowing and clean it up all at once. A few times, I had to keep the snow blower (BX2750) a couple of inches off of the pavement, just...

It has come to the time that I have to retire the BX22.. I am presently using turf tires almost exclusively, and my bar tires are still in relatively good condition, should I have a need for them. Looking for suggestions for a quality turf tire for both front and rear of the tractor. I...

I need the exact measurement of the hole in the middle of the rear wheel on a BX. The reasoning for this is that I have acquired a set of rear wheel spacers that are designed for the Jeep vehicles with a 71.5 mm hub. I want to machine a centric ring to fit over the Jeep hub on the adapter and...

MY BX22 has an incandescent glass 2 filament headlamp bulb, as pictured below. After a lot of searching, I have found this inexpensive LED replacement. It can take as much as 2 months to arrive from China, and I will let you know how bright they are. If you search eBay for " H4 Hb2 9003 Bulb...

Are the wheel bolts on the BX22 (1800/2200) metric threads or are they USS fine threads? I know that the BX22 was manufactured in the USA, but I don't know if it is a mixture of US and Japanese parts. If they are metric, do you know the exact size? thanks

I need the guides that the snow blower hydraulic hoses go through on the way to the couplers. These guides look like big springs and mount on the right side frame rail. I have searched for this part on the Messicks website to no avail. Possibly someone here will have the part number. Thanks...

Today, I picked up a BX2816 snow blower for a friend, and it needs a new cutting edge. On this BX3816 snow blower, the cutting edge is mounted on the top side of the housing. I was looking at the similarities of the BX2816 blower, and my BX2750 snow blower, and noticed that on mine, the...

When I last drained my snow blower gear box, I refilled it with 80-90W gear lube. Today, while watching a video about rebuilding snow blower gear box's, the person in the video suggested using "0 0" gear lube. Never heard of it before, but did do a Google search and found out that it is sold...