Search results

Guess the title says it all. needs to be somewhere within 100 miles of 01550. Price, condition, and pictures are always helpful. thanks Dusty

I am in need of a 3rd function valve for my BX23S, however, I don't know which one to buy, the Land Pride or the Kubota. They both offer a model that is specific to the BX 80 Series tractors and Land Pride has a model that is specific to the BX23S model. Having done a lot of reading, I have...

Thinking about purchasing a drop spreader, and am looking for suggestions. I know that I can't afford to spend a fortune on one, but what do you suggest? thanks Dust

Where is the best place to find a good quality coupler at a more reasonable price than buying them from Kubota? Are all flat face couplers the same dimensions? thanks

Sold to the first person that looked at it. Selling my 2004 Kubota BX22 Tractor, Loader, Backhoe, (820 Hours) along with a 60" mower deck, Kubota Sweeper, Kubota front mounted snow blower with a custom made hydraulic turning device, and the mounting bracket / PTO drive shaft and hitch. Tractor...

What type of grease are you using on your tractor. My BX23S had everything greased with red grease, but I don't know what brand it was. In the past, I used molybdenum disulfide grease on everything on my old tractor when it was new, and when I ran out, I just started using what ever I had...

I have studied the switch panel in the BX23S factory cab, and I have no idea of how to access the inside of the panel. I don't see any attachment hardware, so it is truly a mystery how to get into it to add additional switches for rear lighting, etc..

How long does it take for a BX23S to warm up and the thermostat open? I am beginning to think that my tractor is about as cold blooded as my ex girlfriend.

The loader valve lock on the BX23S is difficult to release, and apply. I sprayed the shaft with a penetrating oil, but it still is difficult to unlock. Is this from lack of use, or is it part of the valve an possibly defective. Tractor has 90 hours on the clock.

The day has come that I need to replace a torn tie rod boot. Below are the pictures of this task. Getting it apart wasn't difficult, once I found a 22mm wrench. Seems that mine must have known that it was going to be used, so it hid itself, because it didn't want to come to work. The most...

I was wondering how many people are devoted to keeping their Kubota all Kubota, when it comes to filters. I usually buy my filters locally as I need them, but when it comes to oil filters, I usually buy a case of 12 of a national brand, such as Wix, Luberfiner, Fleetguard, etc. I just looked...

I have just read the Kubota manual, and it surprised me to recommend washing the air filter in detergent, and then rinsing it well, and set out to dry. I have never heard of this before, and was wondering how many people here have done this. The filter isn't a particularly expensive item to...

Last Wednesday I purchased a used BX2816 snowbloer from a Kubota dealer, and I haven't picked it up yet, however, I did take the wiring harness and switch with me. I looked at the wiring harness and switch today, and for the life of me, I can't figure out the wiring on the switch. There are 4...

I have a 2004 BX22 (same as a BX2200, except for the backhoe) 3 point hitch. I was wondering if all that I would need to use the 3 point hitch on my new BX23S is the solid bar and the 2 bushings that the center support goes on and use all my old parts. I searched the Messick website for a...

I was looking at the Land Pride 3rd function valve kit installation instructionss on the Messicks website this evening, and there is an exception to the installation for the BX23S. All it says is that you should take it to the dealer for the hose hook up, because if there is a mistake the...

I am looking for the front hitch for a BX23S. Specifically, I need the BX2810 Hitch, and the BX2811 Drive Kit. I will also consider buying these items along with the snowblower if you don't want to seperate. In a "perfect world" the snowblower will have the hydraulic turning with it...

I am looking at a used BX23S tractor that is for sale, and I was wondering if there is any way to know if the tractor was financed or not. I don't want to hand money over to a stranger based on his word that he owns it outright.

I spoke to the owner, and he said that the gear reduction box is noisy so he bough a new one. Here is the description... He also said to bring help to load it, since he has no way to help. Just wants it gone. I thought of buying it but I really don't have any use for it...

Yesterday I was helping a friend install his snow blower onto his BX23S, and I was underneath installing the driveshaft, and looked up at the drive shaft boots. The front boot was so deteriorated that it was actually torn in have, and the rear boot, had a crack in it along the molded seam...

The fuel gauge in my tractor has stopped working. When it was working, it would stay at empty until the tractor move around some, and then it would give a correct reading. Now, the needle is pinned at the far end of empty, so I am inclined to think a broken wire, or a grounded wire, depending...