Search results

  1. N

    Instrument gauge screen total black out!

    FWIW,the Grand L3240 dates to about 2007. Good Luck!
  2. N

    PTO bypass..

    If you want to run the rear PTO without being in the seat- Tilt the seat forward. Are we missing something? Good Luck!
  3. N

    Kubota LX3310 Cab AC Went Out

    Moisture in the A/C system can cause freeze-ups. A/C work in challenging environments like Florida require careful evacuation/recharge procedures. Perhaps a evacuation,replacement of the receiver/dryer,and a recharge is needed? Good Luck-it's hot out there!
  4. N

    B2601 losing power in reverse?

    Are you in HI or MED,when you should be in LO/MED? Good Luck!
  5. N

    BX-2380 overheating

    Consider removing the battery and use a vacuum on the other side of the radiator. Friends BX25D(BX2370) fixed his overheating issue! Good Luck!
  6. N

    How often do you change oil?

    I wonder what's the average age of forum members? Has me wondering!
  7. N

    b3030 pto lever

    Which PTO lever is hard to shift? The ON/OFF lever,or the MID/BOTH/REAR lever? If the tractor thinks the ON/OFF lever is in the ON position,the tractor will not crank. Good Luck!
  8. N

    Gravel drive plowing with pipe over blade edge

    Commonly known as a turf saver around here. Good Luck!
  9. N

    B2782B Snowblower on B2601

    My 2007 B3030 cab model came with the B2782 blower. Since then,there has been the B2782A,and the B2l782B. Search Kubota USA parts by your model number. I'm sure it could very be possible! Good Luck!
  10. N

    RAL color code B7100

    What is the RAL color code? Good Luck & welcome!
  11. N

    M7040 - AC works but blows hot after a while

    Interesting thread! OP has not posted back. I'm thinking he found coolant leaking into the heater core was the problem. He seemed well versed in AC repair!
  12. N

    Kubota 3030 (2012) wont start

    Time for the OP to crawl under the right side of the tractor and grease the HST pedal pivot fitting. Hope he comes back and reads this!
  13. N

    Broken Oil Drain Plug

    As I used to tell customers when I was a Mac Tools guy- The only good extractor is the one you don't have to use.
  14. N

    M7040 - AC works but blows hot after a while

    I think the OP stated he replaced the receiver/drier.
  15. N

    Intellipanel removal on L47

    I'm jealous of your Lane Shark! My dream implement!
  16. N

    Front Axel

    Perhaps the OP is finding some of the "fines" left over from Kubota's machining processes? Many have noticed metallic residue when draining the front axle,as have I?
  17. N

    Kubota b8200d

    Nice looking older machine! Good Luck!
  18. N

    Need help with tachometer BX24

    Check the belt tension. Sounds like it's slipping and catches on sometimes,resulting in normal operation. Good Luck!