Search results

The plate, yes. The little sticker that tells you what the plate is, not so much. I use the plate visual way more than the little rod and tube deal.

And the loader, from the looks of it. Agree with the fella above, hard pass on the 3310.

Guessing you’ll need some speed increase to make the pump spin at the right speed. My concern would be that after sourcing everything to make it work right, you may just be better off with a stand alone? Toss it on a trailer with a water tank (IBC tote?) and you’ll be off to the races.

Man! This thing is badass. Clipped low-hanging limbs off of some spiny tree of death out in the field and fed them to the new machine. Anything under 3” just buzzed through like butter. I chipped a couple them that were in the 4-5” range and had to slow the feed speed down a bit, but it...

I think they do, but my current system is solid. If I didn’t already have it for my flail, I’d be looking at their other top link options.

WM website shows orange or black for color options. Figured I wouldn’t snivel too hard about the color when shopping used! Lol. Nice looking piles of recycled branches you have there! Should be able to unload that snowblower without much issue. Might toss it in the classifieds for more...

Alright! Finally had some time to get the new-to-me chipper hooked up and off the trailer his afternoon. Having a high school daughter in volleyball is turning into a full time gig… Like my WoodMaxx flail, a Land Pride QH-10 does not work since the top hook isn’t adjustable. Also like my...

Probably a good money maker for Kubota to lose the 0.0% loan rate. Just me thinking out loud here, but don’t they simply add in the actual cost of the loan with the MSRP? Seems plausible that they bank on us being naive enough to believe it’s “free” financing, and then just add the...

Cool! That sounds simple enough. Set parking brake. Put range selector in Neutral. Hop off. Go ham with chipper! the brake was a no brained, but I don’t know if I woulda thought about the shifter position…. Thank you.

Good to hear you like it! Are you engaging the PTO just off idle? Another deal I gotta figure out is what do I do to keep the tractor running with the PTO engaged and me not on the seat…. I can always flit the seat up and hold the seat switch down by sliding the little wire harness over...

I’ve gotten lucky with all items but one so far. Grader scraper, box blade, landscape rake, and tiller are all the same and hook right up to my QH10. Only the scraper and filler are LP brand. The box blade is a Woods and the rake is from EA. The only mod I had to do for the WM flail was to...

Double check, but I think I have a QH10 and the top hook is not adjustable. I believe the QH15 may be similar, but with an adjustable top hook. Had I known when I bought, I would have paid a tad more for the QH15…. Most of my pieces work fine, but I had to develop a workaround to get my...

Thanks fellas. I do have a WM flail mower, so am familiar with the clunky startup on that. Glad to hear it should be similar. Chipper instructions say to engage PTO at low engine speed and then bring it up. That’s what I do with the flail. Not at idle, just a little above seems smoothest...

Ok. She’s mine now! This thing is cleeeeeaaaannnn. Still has the plastic wrap on the hydraulic hoses…. Question for those that have used a chipper on a B2650… How does the tractor like it when you engage the PTO? With no mechanical clutch to feather, it seems like it may be pretty...

Thanks all for the input on this. Deal has been made, and I’ll pick it up on Wednesday. Luckily, he has a tractor to load it on my trailer so I don’t need to schlep my machine 100 miles each way to get the chipper. Even loaded backwards, that’s further than I think I wanna go with the ROPS...

Dual powered indeed rollers. Hydraulic powered with variable speed. Link to what I’m trying to acquire: https://woodmaxx.com/product/woodmaxx-wm-8h/

I use my FM-62 on a smaller B2650. Zero issues lugging it around, and only bogs down when mowing really tall (like hood high) thick grass. It’s just a lot of mass under there for it to deal with. If I can physically drive the tractor through brush, it mows it easy.

We’re all soft woods here in my area. Doug fir, poplars, cedar, etc. a few apples that I’ll clip the suckers off and small branches. The majority I want to deal with is 2” and smaller. I currently use a Troybilt Tomahawk, and I’d like to make it easier on me. No interest in piles and...

Apologies for asking a question that I’m certain has been asked! I have an opportunity to pick up a lightly used (18 hours) WM-8H chipper. It’s more machine than I need, but the price is right. If my research is somewhat close to accurate, this thing is close to 1,000#. Looks like my B2650 has...

I couldn’t agree more on a larger machine! But with my little B2650, it’s a little bit of a challenge to use chains from a point on the frame. I did that for a while, but I had to have it perfectly positioned on the trailer so my chains would have a straight shot to the tie down points. The...