Search results

I use smudge pots to get rid of my waste oil. I find it's easier than starting campfires and when I go in for the night, just close the shutter and lid, next morning just fire it up.

I assume both battery posts/terminals are clean. Sounds like a bad battery ground cable (is it the woven type) or where the ground connects to the engine needs cleaning. To prove, take one jumper cable and go from the negative on the battery and connect the other end to the starter mounting bolt.

The painter has a lot of faith in the operator, if he swings the bucket and gets tangled in those power lines, yikes!

Interesting read on this subject. How Mohawk ‘Skywalkers’ Helped Build New York City's Tallest Skyscrapers | HISTORY

Tongs have their use, haven't used mine in 15 years. These are the best (4 Pack) Logging Chain Choker Hook - 5/16" 2 Tons 4500 Lbs WLL (myteeproducts.com)

We all get spoiled, with just a few mouse clicks and stuff comes to us. I to have had poor delivery and wrong items show up. But all in all, it's amazing for the amount of product that moves from the supplier and vendors to UPS, FedEx, USPS. Be glad I not the person putting stuff in boxes for...

I'd have someone come in with a large excavator with a thumb, dig around and push it over stump and all. While you cut up the tree, let him take down the chicken house and dig you a pit, shove everything in the hole and burn it all. When you bring a dozer to remove the topsoil (save for later)...

I hope you did a Phase I environmental site assessment prior to purchase. Will you be on community water or private well?

You're on the right track remove the bungs and inspect, if it looks acceptable, then hydro the tank to 1.5 to 2 times the rated pressure. It's better to find out now if the tank is up to suff.

If the rod is the only thing broken and the other parts are still attached, just purchase the rod. I'd suggest changing it yourself. Purchase a WSM which will show how to properly adjust it.

Check the parts diagram, if the flywheel has damage you may need to have it resurfaced and it would be the time to change the rear seal. Front transmission seal? Make up some pilot pins and have a disk aliment shaft, to make reassembly easier.

In your first post you indicated that you shouldn't worry about it, but it worried you enough to ask. Not sure about you, but when I was growing up, I watched my than my fair share of Westerns and still do, I'd bet that over 80% were based on land grabs and disputes. The Indians didn't worry...

I'm not keen on winches, you shouldn't be pulling from your three-point setup. If you're in the woods and try to use the winch you still need to rig the tree, you're trying to pull, then tie the tractor to a tree to keep from sliding., nope not me, if the tractor can't pull it the I just double...

I'd start with a surveyor, preferably the one who subdivided the property originally and have him confirm your concerns, additionally I'd suggest having him produce a certified survey showing all improvements, easements, ROW's, utilities, fence rows, etc. Also have him confirm that what you...

Consider an electronic dog fence. Once your desired fence is installed, the dog will dig out if he has a mind to, and you'll be stuck maintaining 375 feet of fence row. Even with a very secure fence be reminded other varmints can still get in, most dogs are good, but let him corner a mother...

Try ansungusa.com, check their model B2405. I have a model 2150A for my MX5100 and have used it for over three years and very satisfied.

As others have said do lock the diff if the tires are spinning, also go in a straight line, make no turns and when no longer needed, stop and ensure it disengages.

Did the dealer list the parts they were going to change out, if so, price the parts double it and the remainder would be labor. Consider getting a WSM to see what's entailed to perform the task. Grass cutting season is coming to a close, if you have the tools and place to work on it, maybe do it...

It's good practice to close the fuel valve and run the gas out of the carburetor, when it starts to sputter pull the choke out to get the last little bit out. Additionally, on all pull type engines pull the starter cord until the engine is in the compression stroke, this eliminates the...

275 feet of head, are you using a pressure reducer at the house to protect the fixtures?