Search results

Ty wolfman!!! Will give it a whirl today

Thank you .Smokeydog. In the process of getting service manual. I was hoping that wasn’t the case. I hate laying on my back, but always up for the challenge. I will see how it shakes out.

Hello orange Tractor peeps. Looking for some info on what type of antifreeze to use in my Kubota b20? Also doing some hydraulic maintenance and need to redo the hydraulic swing pistons on the backhoe but can’t figure out how to remove them. Any info would be great. The top bar is welded to...

Thanks for the helpful info. Gents!

Thank you both. Yes it is a HST

I have a 1995 Kubota b20 which I have completely re-done. I was speaking to a few of my Kubota friends and there has been some discussion on what type of hydraulic to use in my machine, other then the Kubota UDT version. What grade and brand should be used in this machine? Any other opinions...

I just had the same problem. Did white foamy oil come out of the breather? Let me know please. Thanks

There is no hose on the breather, looks like that's been missing since I purchased it. I'll drain it down tomorrow and ck those lines on the suction side. All records indicate that both filters were changed. I ordered a new hose today as wekl

Yes, I changed both hoses by the radiator on the HST and loosened the next 2 hose fittings behind each side to get a better fit. Once I set the hoses I re-tightened everything. This is why I'm confused. I will check all the fittings and drain the oil. Thx

I was doing some research..when starting the tractor, It takes a little time before the Fluid comes out of the breather. I pulled the dip stick to ck the fluid and thee seamed to be some pressure in the system. One this pressure was released the fluid stopped coming out of the breather. You...

All my products Fluid products are kept inside for that reason. The breather tube is located under the seat of the Kubota so the chances of water entering that are is slightly possible. If water did get into the breather tube how can I correct this issue?

Sorry not oil....The same hydraulic fluid i have always used. (super UDT2)

I checked the dip stick and the fluid is clear, It is over the top of the full mark by a 1/4 " What would that mean? There is no filmy residue at all. I Assumed all air would purge itself......Yesterday when the fluid was coming out I also cked the dipstick and a burt of air came out of the...

I have a 1996 Kubota B20. I recently changed a leaking hose on the oil cooler and refilled the oil. Today when starting the tractor i noticed white foamy oil coming out of the lift arm breather tube. Does anyone have any idea what would cause this. I believe there is air pressure in the...

Did you clean the strainer? Did that help your issue?

A small leaks in the line. I repaired it and checked it, no foaming now, :)stick is all clear. :)

I found it today, thanks for all your help!!!!

Thanks, I will check them today, ill see how i make out.

I will check the check the suction line, im new to the kubota league. I have to look and see which are considered suction line. Also when checking the fluind does the tractor need to be running or off?

I recently checked my transmission and found it to be foamy. What causes this? I dicovered a small crack in one of the front hoses which was leaking fluid. Could this be the issue? Also when i ck my trans fluid should i do it when the machine is running or shut off?