Search results

So i thought i needed a real air compressor. The 15+year old, 8gal hardware store compressor wasnt up to the task of running a small sandblaster, and for some reason i thought it a good idea to get something that could, rather than forget about that dirty job. So, asking around, this comes...

Repiling logs..... they get dropped off with a dump trailer, piles are too long and low to efficiently use firewood processor, so it must be repiled. All good fun. A log loader/ boom grapple would make this a tad easier,theres always that one crooked, crotched log you dont see that rolls out...

I have the accumulator on mymloader and it helps with bounce/shocks on the road. I also have a 3pt snowblower and it causes lots of bouncing st highway speed, so i avoid it now. Id think the accumulator would help. I wouldnt deal with T Bay. Not much for farm tractors in that area. Not far...

Also check your water seperator for dirt. Take the shut off valve out and apart. Blow everyhig clean. I had a piece of foil fall into the tank from an additive container.it woukd plug the tank inlet after a random amount of time. If i remember correctly, the inlet on the tank has no hose...

How big is the tiller? If it's too small, maybe you just got way too much HP for the size of the disks?

Nice set up! The author of that book does nice u tube videos as well. We did a similar sized setup a few years ago, but on a limited budget. We keep adding old batteries from heavy equipment, must be up to 5 or 6 now. They've been hooked up and working for at least 5 years now, and are fine...

We have a Permatex brand at the local Napa or auto parts that seems to work just fine. Sometimes I'll use both tape and sealant if it's a hard to reach fitting.

I'm curious to know why the 4x4 braking is an issue? When is it causing an undesired situation? Ive never noticed the 4wd braking to be an issue, mind you I pull a trailer on the road quite a bit. My brake pedals are always locked together as I have no need to ever turn tight.

Thanks for the links for those parts and sharing your experience. I had the lid fall apart. Can't get just a lid.....had a local guy 3D print me one. Then a pump went..... luckily a universal washer pump worked, I think I had to add some goop to the grommet though. Then the tank cracked. So I...

I pull a 7000# dump trailer with a M7060. I've thought about adding a brake controller. I have an automotive style 7 pin connector. There is no brake wiring on this model. North America, in general may not have brake wiring on tractors. What I planned to do was get a simple controller with...

I have a woodland mills WC-88 on a M7060. The flywheel is belt driven so any nasty load is off the PTO as someone mentioned that. It has its own hyd pump for the feed, so not using tractors like a few other brands. The 8" opening is where it shines, you don't have to trim as many limbs or...

Sorry, guess I meant 'tractor' tires. If a place can get one type, they could get the other I'd hope.

Any tire shop that deals with Industrial or equipment or big trucks should also be able to get ag tires.... think Kal Tire, or a bigger Goodyear dealer.... the dealers price may not be as bad as you think. Maybe try Kijiji and be prepared to drive a ways.

I agree with ^. Whatever brand of tool you have most of, get their 1/2 impact. Check out the specs, most have 2-4 various sizes/torque levels. I have a dewalt, a mid powered one. The 5ah battery came with it and delivers enough juice to do anything a home mechanic has needed. I've done some...

Sometimes I hear a noise at startup but not like that.... I assume it to be the AC compressor/clutch. I can't imagine what else there is to make a noise. Try it with the AC on and off ti see if it changes anything?

I dont blame ya for not wanting to mess with warrenty, but i think the 3.5L (same as my taco) in other parts of the world allow whatever weight of oil suits the temps..... what reading ive done is these thin oils help with economy/emmissions. Ive ran T6 5w40 in my tacoma a few oil changes...

Wouldnt need a tractor or a jeep with this option! We tend to pack the snow on the trail, not push it off!! But the 6/8 way blade, whatever it is, sure is nice

Theres not many complaints on the internet about them it seems. But it doesnt take much adjustment to make it work, or work horrible. I had a issue but it was from some wear/seized bearing (a very small one on one of those moving parts) Then i had a stick flip up and bend some stuff...

Ivr had my 7060 be stubborn to get in/out of park of the linkages become wore/bent/seized. When its cold its stiff to move around the pattern. Maybe have a helper move the shifter and watch to see if the linkages are moving correctly. The rubber boot on the shift shaft? will get stiff, its not...

You'll only be underpowered if trying for max capacity! At least the 68 has a bigger opening for those crooked and forky branches... saves some trimming! I have the 88, but it'll bog 60hp when you go too hard!!!