Search results

Will not start is with the Clutch pedal pressed down. That is when the clutch is disengaged, up clutch is engaged.

The clutch is for the PTO to shift the transmission from say M to L you stop the tractor and change the shifter position.

"Dissembled/cleaned the carb " Did you clean the main jet?

I bought this one a few months ago, it empties a 5gal can in about 30 seconds. https://www.amazon.com/gp/product/B07T3STPD1/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

https://www.colemanequip.com/parts/model/Kubota-B9200HST-DP-Parts/TRANSMISSION/TRANSMISSION-CASE/

Reply Not sure on the BX pedals but on an L as you put you foot over the hump you can step on the treadle before you get into the seat. Neutral on a hydrostat?

The only real issue with the treadle is steping on it and the tractor lurching when you step onto the tractor.

And if Kubota changed it to something else there would be a thread "Why did Kubota change the treadle pedal".

Yes and no with the tractor moving removing your weight from the seat will cause the engine to shut down.

Brush or grass cannot cause the tie rods to fail, so it must be something else. Either someone is using the tractor without you knowing or you are running into things.

I have r14's, my place is on a mountain where in the winter it has its own weather system. There is some snowfall every winter night. New tractor so I have not tried them in snow yet, but will post my results using R14's in the snow. Last week I was mowing (3point finish mower) a hill on a...

Cloged radiator low fluid bad thermostat slipping/broken belts water pump head gasket

LOL no not doing that.

Started the tractor this morning 72 hours on it, everything is normal. While mowing I noticed the three lights blinking. Remembered the decal on the fender so I started reading it and it confused me into pressing the inhibit button. Ended up getting the owners manual and doing a parked regen...

All three lights come on/blinking, including the parked regeneration light. Tractor has had two regen's and both displayed exactly the same flashing three lights. I never did see the PM1 level where two lights are illuminated both times it included the parked regen light.

That decal is wrong it tells you to push the inhibit button and raise the RPM. On my tractor 3 lights come on and blink for a regen. do I just raise the RPM and continue working or do I need to press the regen button on the dash. Both time I have done a regen I did the parked regen due to...

So my L3302 DPF lights start flashing, ok no bid deal look at the decal on the fender for instructions and it screwed me up. 1) So if the DPF lights come press the inhibit switch and raise the RPM ? What?

I have some time now on my 55" Catawba grapple and I cannot really find anything to complain abut. I have used it to grab and move a few large boulders that just fit within the jaws with no issues but mostly the grapple was used for tree cleanup. I cut down over 20 large, maybe 4O foot...

Did you push the PTO button to turn it off?