Search results

http://www.tractorbynet.com/forums/kubota-owning-operating/37936-backhoe-pictorial-tutorial-removing-bh90.html Did you perform step 11 in the tutorial above?

I had s similar issue with the telescopic lower links on my M9540(they look just like yours). You can remove the locking mechanism - cotter pins I believe - from the two pins holding the telescopic lower links in place, remove the actuating mechanism and clean all of the accumulated...

Try Here: http://www.mainetractors.net/kubota-l245-dt-parts/kubota-l245-dt-parts.htm

So does anyone have the specs of Red vs Blonde vs Brunette?

I am editing this post because I did not make it clear that I made this post only to clarify that Super UDT2 is synthetic. Kubota Super UDT2 Synthetic Universal Trans-Hydraulic Fluid • Gravity, degree API: 34.5 • Viscosity @ -40 C, cP: 16000 • Viscosity @ 100 C, cSt: 8.1 • Viscosity @ 40 C...

Symptoms are very similar to what I have read on this forum when it has been discovered that 'Gasoline' was accidentally used to refuel rather than diesel.

If you have another PC that you can access the internet, you can download a free hard drive diagnostics program from Seagate(it will test any brand but will only attempt to fix Seagate drives). You will download a file with a name similar to seatools.iso -- you also need a CD or DVD...

Service Dept Vic Video about overrun clutch: http://www.youtube.com/watch?v=k5-XUE09by4

“I have this model tractor and have done the adjustment several times until it was finally set just right.” If this statement had preceded the adjustment explanation it might have given the OP the confidence to perform the procedure to find if that actually fixed his problem. It is possible...

Yes, definitely RUDE & arrogant!

"The squeaky wheel does get the grease!" This statement reminds me of a time when a few of my co-workers were having some dispute. My boss told them "Sometimes the squeaky wheel gets replaced!" - I have never forgotten that statement.

The person making that video must have had one of these - http://www.amazon.com/DJI-Phantom-Quadcopter-Integrated-Camcorder/dp/B00FW78710

You must have missed post #15 - rim(s) were spinning in tire.

June 2013 someone posted the following links for a horizontal grapple. http://mytractortools.com/newgrap.html http://www.youtube.com/watch?v=wslMngZt5Jc

A Double Pole Double Throw(DPDT) is essentially two separate switches ganged together to be operated by the same mechanical actuator. In the drawing S1 and S2 are not electrically connected together.

It has taken a lot of time and patience to finally be above average!

[/URL][/IMG] This is from my M9540 manual, but I would guess that your M7040 system works in the same manner - this should give you an idea of what might be wrong.

57 and counting..........................................-

Experiencing a little stretch of 'cold' - currently -23°F dropping to -34°F tonight but going to have a 'heatwave'(finally above 0°F) on Thursday afternoon. So far this winter has been quite a bit colder than normal - come on SPRING!!!

I have not tried the Form-A-Funnel®, but it might help make less of a mess. Come in 14.5”, 22”, & 29” lengths...