Search results

Don't let the old man in.

I suggest raising the side skids of the cutter off the ground at minimum. I would also ensure that the front of the cutter is lower than the rear. You should be able to adjust your tail wheel height to accomplish this after figuring out how low you are going to lower the front while cutting...

If you are set on a geared tractor disregard my post. If you are open to HST, you should consider the MX 6000. I have 240 pecan trees I maintain with the MX 6000 cab. Work includes spraying leaves with an air blast sprayer, shredding between rows, some 2000 lbs. Lifting of nitrogen totes and...

I have the 6000 too and mine vibrates when roading it as well. My dealership let some air out of the tires but it didn't help. He said the other 6000s they had did the same thing when they tested them. I have the R4 Industrial tires.

I use a disc harrow to break up compacted or un-worked land. I follow up with a tiller prior to planting. I have used a L3301 and MX 6000 for that work.

Just added a couple hydraulic flow regulators to my air blast sprayer. The volute was way too violent when I would manipulate the remote lever. I added these to slow down the action. I'll put them through a test run spraying this weekend but after installation it appears that it has accomplished...

If you have some acreage you might consider Guinea Fowl. They are supposed to be very good at taking care of ticks, mice and other pests. We had some but they kept venturing into the state highway in front of our place that has a 70 mph speed limit. We lost almost all of them to vehicles.

I just got an impact socket set off Amazon for the same thing you are doing. B0CG142P4T I'm hoping they work out. I couldn't believe I found a set in that size in 1/2" drive. Hopefully I'll have an easy time with it like you did.

I purchased a 72" core aerator from Everything Attachments a couple years ago in which I've been very happy with. It's a drum design that weighs over 700 lbs. filled with sand. I also place cider blocks on the top rack to add weight then ratchet strapped them down. Our soil is a loam clay that...

After you get your new battery you may consider a battery maintainer to keep it fully charged between uses. I put a maintainer on our tractor, UTV, car and lawn mower and its saved me l lot on the cost of new batteries. Of course you would have to have a place to plug the maintainer in or go the...

I have a newer MX6000 with telescoping lower links. Yes they do have some play.

I have the MX6000 and love it but you should consider the 7060 for added lift capacity. The cab is really a nice feature with A/C, heat, stereo and not much dust/pollen. I added side mirrors, air seat, 3 point quick attach, wheel weights and had Rim Guard put in the tires. I don't need to add...

Good Morning. I'm getting a sprayer ready for the coming season. I'm putting a solenoid on the sprayer and running a wire with an interrupter switch into the cab of our MX6000. I will use the switch to turn on/off the spray as I travel between trees in our orchard. I'm looking for a good spot to...

I would post your question to this forum: https://www.nettractortalk.com/forums/forums/kubota-rtv-owners-group-forum.133/ There are some guys that seem to know their stuff on RTVs on that forum

Good to know. I'll have to keep an eye on my sprayed implements. Could you find a Valspar color that matched up with Kubota orange?

Really..... I am curious as to what your experience has been with it and why you have that opinion. I haven't had it on my implements for very long but it seems to be decent stuff to me.

I've been using the "MAJIC" brand "Kubota Orange" from Tractor Supply. It's more cost efficient compared to Rustoleum and seems to match up well. I just painted an air blast sprayer that I refurbished and the bucket on the FEL after welding on some hooks. I can try to take a picture to compare...

Selfishness! I can't stand selfish behavior. Here's a few examples.... refusing to signal when driving, camping in the left lane, taking up more than one parking spot and not returning a shopping cart to the store or designated area. Yep, I've turned into a grumpy old man.

I have a King Kutter tiller. I bought it used for $700. It was leaking on one side so I changed the grease on the gear boxes and replaced the gasket. The skids were in bad shape so I replaced them as well. King Kutter can provide parts if you need to replace anything. I bought a broadcast...

I'll show my wife your top picture but not the video.