Search results

Being that the 21" arm meets in the center of 2 3/8 total wheel spacing with 1 3/16 from center to wheel on top, and 1 3/16" from center to wheel on bottoms, would the force on each wheel still be 1414.7 lbs or 707.3 on each for a total of 1414.7? fyi, here is a picture of the "c" channel that...

Yes, I will be using a winch. The cable attachment point will be 2 3/4 inch out and inline with the top trolley wheel. The winch cable will be a few degrees off of vertical away from the attachment point. See new picture.

I am fabricating a lift mechanism for my L2501 and was hoping someone with better math and engineering skills than I could help out. I am attaching a drawing that should explain what numbers I need. Or what would be the formula? The 21 inch bar will be attached to a trolley at right angles...

Used my B7100hst to pull a Dew Drop Drill (no till grain drill) made by Little Sioux Prairie Company to plant a small (less then a acre) area behind the house with native grasses and forbes (wildflowers). Thanks to US Fish and Wildlife and my local Pheasents Forever chapter.

The dealers service tech came to my location this afternoon. Took care of the tie rod end. Double checked and set toe in. Greased all zirks , re routed the third function hydraulic lines that were too low and did a general walk around and check, fluids included. Prompt and professional after...

Dealer is sending their service manager out this afternoon to take care of the tie rod issue.

Thank you!

Thank you Fordtech86! That give me assurance that mine is correctly assembled.

Makes me wonder about if the toe in was set correctly for sure. And good advice!

:eek:hard to get dirty when one front tire is turning left and the other is turning right! LOL

after looking at things a bit closer I also wonder about if this center linkage is installed correctly . to me it appears that plenty of splines are left and the large nut shows internal threads, meaning the shaft is recessed into the nut. I am used to when a part is engineered that the shaft...

I took delivery of a L2501 and moved it in my garage. Today I backed out for the first time and to my surprise the right front tie rod fell off were the tie rod end is secured to the steering knuckle part of the front axle. (sorry for poor nomenclature). No damage to the threads of the tie rod...

My new L2501 was delivered today and thought some might be interested in my build as I modify the hydro and clutch for hand control use. I have a B7100 that I fabricated and installed hand controls about 10 years ago and they have worked very well. I did want to note a disclaimer. Everyone's...

I have a 1997 B7100hst with midpoint pto. I purchased it used in about 2009 without a snowblower. After searching for a few months I found a used blower and most of the under carriage parts. All the dealer was able to tell me was that he "thought" it had come off of a B7300 I drove the 100...

Back from the dealer, inspected and took care of the business end. I should have it at my house in the next few days now. I did spec out the tractor with Landpride dealer installed third function. I have been looking at a lot of different grapples and will make a decision soon. I suspect...

All great advice and suggestions! Thank you for taking the time to post. I have considered most of these options at this point, and until I get the tractor on the land and start testing the waters I will not know for sure what option is going to be the best. I do have the time to work on...

Thanks for the thoughts and recommendations! The Mini Clip is a very nice looking piece of equipemt. It is out of my price range and has capabilitles that I will not need such as pruning. I had thought about a tree puller as the Scots pine are in sandy soil. I was able to push up to a four...

I will be picking up a new L 2501 this week, fitted with loader and third function. Can anyone recommend a tree shear for the loader quick attach , light in weight, light in cost? The vast bulk of trees I want to shear will be Scots (scotch ) pine with a max trunk diameter at the base of 6...

I live in central Wisconsin and certain years will see lots of snow, some storms in the 20 to 30 inch range. I have a long blacktop drive and I also take care of my next door neighbors gravel drive that is also in the 250 long range. I have a 50 inch front mount blower and a 6 foot back blade...

Thank you! I will back off on every spring.