Search results

I wonder what kind of stories kids of today will be telling 30 years from now. " Well., I gaudeeated from hi school and dicided i needed a few years off to recupa rate. Mom finally kiked me out of the house when I was 30. She got mean in her ol age.

Standardization,,, yea like back when Chevy had the same eng bolt pattern all the way from a 6 cylinder to a big block 454. Those were the days!!!

While we are on the subject,, Many of the new HD , allison, ford and dodge trucks are useing full synthetic transmission fluids. Wonder if any of them could be used for hydro units in tractors? I use Valvoline Max Life in all the ones I build.

What amazes me is the idiots who buy this stuff. Do they not have any common sense???

Well, I have to ask,, what is stiction???

Useing a box blade is not a good idea for ballast. Yes , it works but. Most box blades stick out past the rear wheels and several feet back from the 3ph connection. When useing the fel, you tend to concentrate on the front end and forget that it is back there and can easily hit something with...

Yes't,there is an early and late orange paint. Don't kn ow when they changed. The new has a slightly more red hue to it.

does the rear 3ph raise?

Just inside lft rear tire at the back is where the mmm linkage hooks up to the 3ph linkage. Someone else had the same issue and the linkage had come off there.

Radio Shack used to be the place to go for contact switches. An electronics store may have a normally open contact switch. Then it's just figuring out how to mount it.

I have double digit amount of guns. Of all those, I have only 5 that have never failed to feed, failed to fire and failed to eject. One of those is a Kel tec 9mm.

Did you drive up to the J bar site in Summerville?? They are only about 25 miles from me. I passed by there last week and they didn't seem to have as many implements outside as they normally do. Maybe they'r selling a lot.

Don't know about that but,, GM has started useing a pan gasket on the chevy trucks that fuses itself to the transmission pan. It doesn't stick to the aluminum transmission case. It's so bad that we have built a pan with very soapy water and we turn the trans pan over and lay it in the soapy pan...

skeets, funny you should mention that. My neighbor works at a steel store and called me today. Said he had some ar500 and what size did I need. He brought me 6 targets. I guess it helps that his son just bought a blackout 300.

tsc has an antifreeze that has an additive in it for diesel engines. It has something to do with static electricity. Can't remember the name of it. I use it in my Kubota and Ford f250 7.3 diesel.

That knob will not turn if there is any weight on it. If you want to change the height, you must raise the deck, reset the knob and then lower the deck. Mine is a little easier to turn one way or the other. It helps to spray some lube on that mechanisim.

What most people seem to forget or just don't think about is this,,, the front tires are NOT the outside support for the front end. The center of the axle is. The front pivots in the center and the front wheels do not provide any outside resistance until the frame contacts the axle,,, right...

I have no knowledge on your specific tractor but, most gear selectors have a "detent" to hold the selector in the correct position. It is a notch in the shift rail, a steel ball and then a spring. If the spring breaks, no pressure to hold the shift rail in the correct position. There are other...

I have one that hooks to my rear 3ph and plugs straight into the batt. Never had a problem with it, has not even run the batt down that it will not restart the tractor. fyi

Very common misconception. The power assist steering on these tractors do not operate like most other systems. Without trying to explain how they work,,, what you are experiencing is normal..