Search results

Change your search to include the words: - Takeuchi Diagnostic - Python Adapter - activation service For about $3,000 you can get the equipment and codes needed to be ready to go. Remember only 5% of the world resides in the USA. 95% people (ROW) live outside the USA and often don't have...

I my experience seeing guys with small machines like yours if you are going 12' wide (driveway and siding work) you are going to have 400 - 600 bucket trips in and out of the jobsite. Rarely / almost never do I see home owners who are removing overburden with small equipment get struck buckets...

its a pto powered herbicide sprayer used to spray grasses etc.. between row crops.

the WSM for both loaders are free on the kubota site and lots of dimensional info. here is some to get you started. assuming LA402 not LB402 as I don't know LB line. hope it helps

realize this is a 4 y.o. post from the OP but draw bar locks will work if others are looking. Cheap and one on each side works great. https://www.princessauto.com/en/search?Dy=1&Nty=1&Ntt=drawbar+lock

I pulled the BX25 manual off the shelf and it says engine rpm at 3142 gives pto rpm of 540. (page 9 under specifications) good luck... I love snowblowing!!

from my experience and given your snow depth after the storm being greater than what your blower can handle in single pass try running your blower maybe 8" or more off the ground for first pass. Second pass drop to the ground to clean up what remains. Run in low range and engine rpm at the...

no not governed. on your engine tach (engine rpm gauge) you will see a marking range which at that engine rpm your pto turning speed will be 540 rpm which is where your blower was designed to run. I often run less as snow is fluffy / lighter this time of year. Given your snow dump last weekend...

opinions? sure to get wide range. For me I would buy new. After neg. price diff. may end up not that much. New gets you started building relationship with a dealer as well for warranty etc.. Since you didn't mention if used was from a dealer or private and if through dealer they are certifying...

on my L3301 w/ BH77 BH yes the draw bar can be mounted when the backhoe is on. BUT bottom of BH is low and would be in way of using the draw bar so draw bar is not usable.

the 6060WSM says this is likely a communication error between the ECU and the intelipanel. Not an area you want to apply too much heat too as electronics not fond of high heat. WSM does not suggest any on site repair. Going to guess they are going to try a new ecu and if this does not work then...

ahhhh.... winter in Canada and the seasonal arguments about what is better. - Front mount snow blowers - rear mount pusher snow blower - rear mount pull snow blower - front snow box pushers - rear blades - etc... now around the coffee table neighbor brings up another option that has been...

I remember once reading or being told something very simple. Low: is for Loader work Med: is for Mower work High: is for Highway travel (not for work) very simplistic but about right I think. Medium depends I guess on alot of other variables like thickness of what is being mowed, size/type...

but some clubs cost as little as $20 to join, no horse required and membership and sign-up on line and membership card printed immediately off the internet. Also many different types of community clubs one can join. :) Kubota sure makes it easy for owners... one great brand IMHO your local...

around here, 18% is starting point (or more as this is advertised publicly a lot) plus deals on accessories over and above common. See sample of a Kubota Ad saying 18% off which is common in magazines. https://www.therider.com/site/blog/2018/03/28/kubota-equine-discount

exactly.... take a little care and thought and no vibration or problems so far (fingers crossed). I actually used a digital scale I use for weighing reloading power to make sure the weights of each 4 were almost the same. Weighed the conveyor belt, nylon nut/washers/bolts to make sure each...

if your blower is plugging up with wet snow, I know a lot of people will use silicone or cooking sprays in the chute and impeller housing. I would suggest check your tolerance / clearance of your impeller and it's housing. For my Buhler /Farm King blowers the space between the impeller and its...

i'm logged in and don't see any pic or link refreshed as well am I doing something wrong?

wood boiler w/ electric base boards under all windows..... so I cut wood from my own lot which costs me my labor and about $60/mth for electric heat/lights/tv's/etc.... This includes heating a large in ground pool to 92f most of the year as well and house is medium to larger than most. Pool...

its an option with MSRP of $65.