Search results

Can you post a couple of photos of your tractor? EDIT; found some online... fill is on top of the transmission (circled in green) Not sure if that's a measuring stick also.

So the next model from ours is the L3200, the breather tube is on the side of the "Top" of the engine... look there.

How much oil is coming from the filter? Blowing the seal sounds like a lot... If you have to unscrew the filter to check the double, rubber gaskets or magnetic rings, there is a quick trick with a shop vac sucking "air" through the fill port. When you unscrew the filter, very little oil comes...

See photos I added for location of tube....

Been on these forums for 20 years, have not heard of this before... Is your L2800 early model? 2004 until 2007 or is it the later models that have "Extra Power" decal on the side of the hood? (after 2007...) Only thing I can think of, look for the breather tube under the seat - see if it's...

Knock yourself out... If your tractor can pick it up, the loader arms will be fine. Your tractor could have been equipped with the LA805 Loader which lifts more but pretty sure the only difference were larger hydraulic cylinders. Below is a photo of a small rock with my LA463. Larger rocks...

Nope, 30+ HP does NOT mean PTO HP since you are NOT connecting anything to the PTO. If it was a tiller, chipper or a mower that has a PTO drive shaft, then yes they would mean PTO HP... Really, your main limited factors are going to be tires (if you have R4/Indust. vs. R1/Ag) and if those...

Also, slightly move your joysticks, make sure they are not in float mode. Your hydraulic system is open center with power beyond, if a valve (like the 3 point hitch) is slightly open... it will effect "up" stream hydraulics. Your valves are in series (one after another) and they all use the...

I would buy a replacement belt and keep it around for when the old one breaks. No need to replace something if it ain't broke.

Are there fertilizer sale places or gravel pits around you? OR any truck scales nearby that you can use? I can get my weight just driving to the yard waste facility.

https://kubotabooks.com/AutoIndex/index.php?dir=Tractor%20Owners%20Manuals/&file=L2800-L3400%20Workshop%20Manual%209Y011-13193%281%29.pdf Search " injection pump " [CTRL] + F for search feature. I don't know if this might help...

Search and read... down load manuals here: https://kubotabooks.com/AutoIndex/index.php?search=LA525&dir=&searchMode=fd 805 lb for the LA 525 page I-9; same page the 66" square back (I don't know model #) 265 lbs Don't know if they break down the loader; weights of the parts... I didn't...

So, your hour meter is working perfectly, as it should. Yea, that's how it works....

I would be cutting or grinding the QH to make clearance. OR make your dealer do it if you can not. That should not be happening!!!

If you have punches for the roll pins and big hammers, it wasn't a hard job to replace the tube. https://www.agrisupply.com/tubing/c/3500016/pgnum/2/ This is the one I used to repair mine. https://www.agrisupply.com/repair-ext-tube-for-pto-shafts/p/33060/ On the second link, it has links to...

Would not changed a thing... would also never sell the one I got! Added: Top-N-tilt, grapple hydraulics, right side step, Pat's, adjustable sway links, canopy, grill guard, silky smooth 3 point hitch (instead of the real jerky one)

Guessing here, try just single click to attach photo?

Couple thoughts... tractors that have larger loaders are much wider and heavier than our "standard" L's. As long as you are on flat ground, you should be fine. Have you checked your system's hydraulic pressure? (that was set at the factory) My guess it's set at the low end. I've been amazed...

Are you sitting in the seat? I would look at the seat safety switch, to see if it's working....

L ook up: Hydraulic adjustable needle valve... they have control in both directions or you can find them for one direction flow control... https://summit-hydraulics.com/product/hydraulic-flow-control-needle-valve-3-8-sae-ports/