Search results

No Emissions is my reason for a LX2610, as winter time I believe the DOC can not get warm enough to function.

I own a LX2610 with 2 inch spacers on the rear and have a 60 MMM deck. With the smaller of the two R14T tires available(I believe the cab version does not get a choice of tire size, you get the smaller diameter tires). I think the LX2610(cab) feels more tippy than my old BX2370(no cab) and they...

I have a different opinion, 2005 mule diesel which replacement the 2001 Mule that put a rod thru the side of the block at 515 miles(all maintenance was done and 1 month out of warranty). Now the 2005 mule at 750ish miles needed injectors due to excessive smoking, About 100 miles later a CV axle...

Depending on the make and model of pickup or car some vehicles have a Schrader valve on the fuel rail. I just hook up a fuel pressure gauge and use the volume button to fuel my lawn mower up(zip tie to hold button down and egg timer) and clean off work bench(I swear my family has something...

Also point the vents towards the windows. Also I keep my back window open about a inch.

OK I'll try again, what is the stroke of the piston? It is not used on my setup, looks like it was used on the older setup. My is the 4 point connection(K-connect) No linear actuators or other sidetracks. A flow resistor will slow the chute speed. Yes kubota is crazy expensive so just need the...

Can anyone that has this setup measure to total length of cylinder both retracted and extended?

My dad advise me to go to the locate empty church parking lot and "play around" to understand what snow does to traction and how the car would respond. The local police officer was not impressed and told me to go home(at least no ticket). Now some communities offer driving school safety(I'm an...

So basically you and the dealership did something illegal and it didn't work out, so now you want Kubota Corp. to fix it for free? As a GM dealership tech I am remembering all the issues I have seen with aftermarket programmer's that have destroyed the engine and the customer wants it to be GM...

So basically you and the dealership did something illegal and it didn't work out, so now you want Kubota Corp. to fix it for free? As a GM dealership tech I am remembering all the issues I have seen with aftermarket programmer's that have destroyed the engine and the customer wants it to be GM...

290ish hours on mine(2" spacers) with no issues and backhoe has been used with them on the tractor.

I have seen quite a few "techs" fire that parts cannon over the years. Then the bean counters figured this out and starting requesting(demanding) warranty parts back for inspection and the dealership would not get paid for improper/not required "repairs". One that comes to mind is an airbag...

I had the R4's on my old BX2370 and R14's on my LX2610. The R4's both front tires had to be warrantied due to sidewall budges(one tire was budging before delivery). The R14's in my opinion the R14's have better traction in mud/snow. Also notice the R14's do not seem to squat as much as the R4's...

The WD-40 cans I come across are soon setup as target's for the 9mm. That is how much I think of WD-40.

As for cheater pipes are never needed, then you have never done brakes on an early VW's axle nut torque was 348 foot pounds if I remember correctly. And back in the early nineties impacts sucked. Ended up buying a torque multiplier.

On my tractor(LX2610) the starter has 2 big studs and a male spade terminal. If you unplug the spade terminal and install your test light it should be bright when trying to start. Then with the key off at the spade terminal on the starter apply 12 volts to it(long wire to the battery positive)...

" I've had no real problems with the tractor up until now, which I'm glad about since I bought it used. About a week ago, I do recall now that a similar thing happened where I went to start it and nothing happened. I looked at the various levers and switches to see if something was set...

Yes a starter switch from amazon 21 bucks. https://www.amazon.com/Remote-Starter-Switch-Heavy-6V-12V/dp/B08XBP69Q5/ref=sr_1_3?crid=32Y9IVXFXOSFA&keywords=starter+switch&qid=1648674144&sprefix=starter+switch%2Caps%2C674&sr=8-3 But you could grab a old screwdriver or a bigger insulated wire...

Have tried jumping the starter with another person in the seat(Be very careful with this method)? Can you locate a WSM for your tractor? I have a LX2610 WSM I can email you(send PM with email) it may be the same or damn close. My tractor starts with no one in the seat so I don't think that is...

Does rim-guard sound familiar? I know when I ordered my LX2610(first way in my area) the backhoe was 8 months out. Also the wheel spacers and the backhoe are not a recommended combination(I did it anyways((2inch)). I would recommend you check out BXpanded for a piranha blade as it really helps...