Search results

Had a piranha bar on my BX2370(traded in) and it was the first thing I ordered for my LX2610. My brother really wants one for his L3240 but spent all his money on the tractor.

I ordered a dozen UBS charger cables that were the 3 in one type cables as everyone in my family looses cables. They had a UBS mini, micro, and an apple style. For the 15 bucks I spent very happy with the quality and as a bonus the cables do not handle data therefore my stupid GM's vehicles...

This has been a while ago but, worked at a tractor/automotive repair shop and had a guy that would come around and buy all the old anti-freeze. I think he paid 10 dollars per 55 gallon drum(instead of us paying safety-clean $0.25 per gallon) so the owner was happy to get rid of it to him...

WOW!!!! Talk about luck and they are both on the same planet..... Really won't give out what state they live in, but, willing to post phone number for all. SMH :eek:

Jimmy Carter put us in the US on the path to use the metric system, but, after one week gave up. :ROFLMAO: You think you have it bad with just Metric and SAE. I have worked on early MG's and yes own a set of British standard sockets(BSS I think). And now TORX internal and External(Madza I think...

If written by Alldata it would go something like this. 1. Remove lines from loader 2. Replace lines as needed 3. Reassemble is the reverse of removal. Ok sarcasm is over, take pictures and label bolts(I use cupcake tins and post it notes). Penetrating oil on fittings is your friend. Flare...

I agree with NIW, but, how did you clean the mass air flow sensor? Does it have power and ground at the wires(I am assuming this is a three wire sensor)? I have had some luck using a MAF cleaner(CRC).

I have a LX2610 HSDC and I run a RTA1258 tiller. I feel it handles it just fine. Central WIsconsin black dirt and I have used it on the corn field and have used it on virgin ground. It covers the R14 tires with 2 inch spacers just barely.

Per my GM training "Their is not such thing as a complaint just customer concerns". :ROFLMAO: :D Actually had to sit thru a two hour class for the 3 C's(Customer concern, cause, and correction)

I own a Mini-Ductor and was wondering if anyone a tried to groove a tire with it? If so did you buy knives? Is it possible?

At my 200 hour service on my LX2610 I changed all the filters at 200 hours except cabin(removed and blew out). My opinion is filters and fluids are cheap insurance and I will change them yearly or more as needed.

I leave for work at 5:30 AM and the community driveway that is 1/2 mile has to be done before I leave. I want LIGHT so I can see. Have the bar on the front with 4 more of the little ones on each corner. Yes the Code3 warning light was overkill, but a freebie out of a Railroad truck from work.

I have done several walnut shell blasting on engines that would have a mystery misfire engine issue after other techs/shops have sold tune-ups, coils, timing chains, fuel injectors, fuel pumps, and one shop replaced the alternator(could not figure that replacement out). Yes, the VW/Audi 2.0 and...

Do you have a test light? If so test the fuse while it is in the fuse box, key on, touch the little metal tabs on the top on the plastic fuse(that is what they are for). I not trying to talk down to you, just don't know your experience level. If you want PM me your phone number and I will try...

Does it have power?

(2) 15 OPC controller, hazard Did you check this fuse? Are you able to download the WSM? Page 647 is the Electrical system for the tractor. Is the tractor stored outside, inside?

Sometimes all Four Wheel Drive is good for is making the walk back farther.:ROFLMAO::cool::sneaky:

Look for mice evidence under hood and dash, check fuses with test light. PTO not engaged, sitting in seat(not sure on this one as mine starts without sitting), HST pedal not engaged? 1. Battery discharged or dam- aged Solution order 1. Check the battery voltage. 11-44 2. Recharge the battery...

Do you have a WSM? Here is a copy. https://drive.google.com/file/d/1uJtkd_6wzrhP_uyIplpSad_OnoEA7UHt/view?usp=sharing

https://www.amazon.com/gp/product/B06XQGQTXQ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 5 years and still going strong, Kawasaki Mule 2510 mostly left outside.