Search results

  1. I

    BX23S-RCK54BX Mulch Kit - Thoughts.

    Yes, looks like the kit installed in the video. I did not do the install. My dealer did it before I took delivery 7 years ago. Sorry, I don't know the gauge of the metal, but it's not as thick as the deck itself. I don't use the Kubota blades. I use G6 Gator blades.
  2. I

    BX23S-RCK54BX Mulch Kit - Thoughts.

    Uhhhh.........Kubota did that already. I have their mulch kit on my 54" deck.
  3. I

    Cut Height and Greasing on a BX.

    Cut height depends on what kind of grass you're cutting and how often you want to cut. My cut height is 2", but I'm cutting centipede. I usually mow about every 2 weeks depending on rain. Takes me about an 1 1/2 to 2 hours to mow. I grease 3 or 4 times a season. Pulling the deck and...
  4. I

    BX23S-RCK54BX Mulch Kit - Thoughts.

    I can't tell if the OP is asking a question or making a statement.
  5. I

    Rain Gutter?

    Wear a poncho. Drape it over the back of the seat.
  6. I

    BX1860 Mower will not engage

    Does the rear PTO work?
  7. I

    Using glow plugs or not using

    I have no clue what this means. I always use the glow plugs for the first start of the day no matter what the outside temperature is. As others have said, if the tractor is still warm after a shut down and I need to restart, I don't use them. If it's completely cooled down and I need to...
  8. I

    bx2380 HST neutral position location

    Several youtube videos on various things to try to fix the problem.
  9. I

    Kubota 1880BX cutting dial won't lower

    There is also an adjustment that can be made up behind the left rear wheel. Check your owner's manual. It's in there.
  10. I

    Color Identification Ring Part Numbers

    Or colored electrical tape.
  11. I

    BX23S 4in1 is GONE

    So basically, you did this?
  12. I

    Drill Chuck for 1/2" Impact Wrench?

    Anyone use a drill chuck on a 1/2" air impact wrench? I need to drill some holes to attach some 6x6 post anchors in some very old concrete. I don't have a decent hammer drill so thought I'd use my air impact. Bad idea? Good idea? Any recommendations?
  13. I

    FEL sag

    It is absolutely not normal. As Dan said, take it back to the dealer and have them fix it.
  14. I

    L3800 l3901 l2502

    I'd go with the used L3800.
  15. I

    I think I've made my retirement decision....

    As a near 71 year old who retired nearly 11 years ago, I'll just say this is the best thread/topic I've ever seen on OTT.
  16. I

    BX2380 rear ballast weight

    You're never going to figure it out exactly because each FEL load is going to be different. Put 350-400 lbs back there. You'll be happy 99.9% of the time.
  17. I

    Gonna try the 3pt mower this year.

    I suspect you're right, but I've never had a ZTR and the OP didn't mention having one.
  18. I

    What did you do to or on your Kubota today?

    Cut grass.
  19. I

    What's cookin' boys?

    That's a nice blue!
  20. I

    Gonna try the 3pt mower this year.

    As long as you don't have many obstacles to cut around, I suspect you'll be a lot happier with the RFM than the MMM.
Top Bottom