Search results

  1. I

    BX 2380 with R 4 tires

    Mine are loaded with a mixture of antifreeze and water. I was advised by the dealer to keep pressure at about 12 PSI.
  2. I

    L2501DT

    Depends on what type of PTO you have, but according to Kubota the L2501DT has a transmission type PTO so if I understand that correctly you should idle down, depress clutch, change gears, release clutch, and increase back to operating speed. Someone will correct me if I'm wrong. I'm sure the...
  3. I

    First post

    LA344 is a pin on bucket. LA344S is SSQA (quick attach) bucket. Either will work for the 1880. If I were buying a FEL for an 1880, I'd buy the one designed for it.
  4. I

    Bx2230 lights

    Turn'em off with the switch. If that doesn't work then the switch may have a short and you can either take it apart and try to do a refurb on it or replace it.
  5. I

    4ft LED replacement bulbs

    I've changed all my old fluorescent light fixtures over to LEDs. Not hard to bypass the ballast. All the tombstones in my old light fixtures were non shunted and were what I needed for my bulbs.
  6. I

    Racor filter, fuel line routing?

    On my 2380 it's fuel tank, filter, pump, filter, engine. Exactly what you said in your first sentence. Mine is not the Racor filter. It's the kit sold by Bota products.
  7. I

    BX24, continues to roll, is there a adjustment?

    Several youtube videos on adjustments that can be made to improve braking.
  8. I

    Murder not worthy of coverage in the USA

    Yeah, he said I was rude. I guess it was because I said his post was bullshit and then linked this story: https://www.foxnews.com/us/murder-charge-legend-taliferro-operation-legend
  9. I

    Murder not worthy of coverage in the USA

    Bullshit. If that were true, then this story wouldn't have run today. https://www.foxnews.com/us/murder-charge-legend-taliferro-operation-legend
  10. I

    Getting Loaded Tires Back On

    Don't take them off and load them yourself. Plenty of utube videos and it's easy to do.
  11. I

    Lowering Mower Deck

    What's your mower height control set to? Sounds like it's set to the top position.
  12. I

    Source for gloves?

    Hair salon supply places have gloves.
  13. I

    L3010D Service and Repair Manuals

    Yep, Kubotabooks.com has the WSM in 2 parts that the OP is asking about. It's under the heading of "Tractor Owners Manuals" but it's definitely there.
  14. I

    Had a Visitor Today

    We have plenty of them around here, too. Took me awhile to figure out why I'd often see 2 or 3 flying around the back or side yard----lightning bugs! They eat them like crazy.
  15. I

    Help! Fuel Can Nozzle in tank

    Light and grabber all in one. https://www.amazon.com/Directional-four-claw-magnetic-retractable-orientation/dp/B0796V5H1C/ref=sr_1_6?dchild=1&keywords=mechanical+fingers&qid=1595699283&sr=8-6
  16. I

    What color attachment would you chose

    I think too many guys care too much about the color of their attachments. To each their own, but I don't care what color the attachment might be. Color doesn't make it work any better or last any longer.
  17. I

    How to determine freezing point?

    No way to tell the concentration in your tires without some analysis I suppose, but here's a table that might help. https://www.engineeringtoolbox.com/methanol-water-d_987.html
  18. I

    How long in advance should I contact dealers?

    I would start talking now and be buying very soon.
  19. I

    50 Hour Service

    Different strokes for different folks. I replaced it all at 50 hours. Glad I did. While the hydraulic fluid looked great, the strainer screen was covered in bits of sealant.
  20. I

    Best QC Hydraulic Fittings

    Don't know if they're "the best" but I'm partial to Summit hydraulic flush face couplers.
Top Bottom