Search results

  1. I

    Replacing my trailer deck

    I'm assuming you're using pressure treated wood----I'd use 1/4" spacing. After it's dried, I'd use linseed oil on it. Many folks even use diesel fuel.
  2. I

    Spacers - Front and Rear, or Rear Only?

    Save yourself some money and buy some Jeep spacers on Amazon or ebay. Brotek spacers are way overpriced.
  3. I

    Kubota B 40 C rototiller operating speed

    Google "00 gear lube" and you'll find plenty of places to order it online or find it in a local place.
  4. I

    Home security system

    I use Blink cameras. I have several of those around the house and shop. I also use door alarms on individual doors.
  5. I

    Kubota B 40 C rototiller operating speed

    I really don't quite understand your question. Run your tractor RPM at whatever is required for 540 RPM at the PTO and you'll be fine. You can buy 80W-90 gear oil at any auto supply store, Walmart, TSC, etc. That's a nice old tiller! Wish I could run across one.
  6. I

    tail lights

    https://www.messicks.com/
  7. I

    SOMEBODY

    1st hit with search of "mantis tiller" https://mantis.com/product-category/tiller-products/
  8. I

    Can you help me with this leak?

    If you're lacking the properly sized open end wrenches, I'd use crescent wrenches (ie, adjustable wrenches). I would never use vice grips on those fittings unless it were an emergency. Vice grips are about the fastest way to chew up fittings, nuts, bolts, etc.
  9. I

    bx2380 towing with draw bar

    Yes, it keeps the drawbar from spinning. Attaches to the side arm of the 3 pt. The drawbar and the side arms are what's doing the towing. https://duckduckgo.com/?q=drawbar+lock&t=chromentp&iax=images&ia=images
  10. I

    48” MMM on BX23 or BX26?

    You can get 48" rear finish mowers. Just a thought.
  11. I

    bx2380 towing with draw bar

    They make brackets that you can use on the draw bar to keep it from rotating for about$20. https://www.tractorsupply.com/tsc/product/countyline-drawbar-lock-cat-1 Or you can buy one of these on ebay for about $70.
  12. I

    What did you do to or on your Kubota today?

    Changed mower blades and gave the radiator a good cleaning. I always do the first mow of the year with last year's blades and then change them with a newly sharpened set.
  13. I

    Quick-connect fittings

    Any hydraulics fittings supplier will have what you need. Summit and Parker are the first two that come to mind.
  14. I

    How good would a grapple work picking up cut and split firewood logs?

    I don't have a grapple so take my comments with a grain of salt. Would making a temporary solid bottom on the grapple with a sheet of tin/galvanized roofing work? Maybe punch some slits through it and use some worm clamps or heavy wire to attach it. Just a thought. Maybe not a good one...
  15. I

    Air Pressure when using beet juice

    My rears are loaded with water and antifreeze. I run about 12 psi in the rears. Rarely use or even have the FEL on the tractor so run the recommended in the fronts.
  16. I

    What type of grease???

    Lucas Red N Tacky
  17. I

    Operating over septic tank and field

    Septic tank and entire drain field are in a part of the yard I mow. Drive over both with my 2380 and have had no problems, but my soil here is almost all dense, red clay. If my soil was nice soft loam or sandy I would probably worry about.
  18. I

    What do you use for a grill

    I use this:
  19. I

    Price Check -- 2020 bx2380 low hours

    Yes, the 2370 and the 2380 use the same MMM whether it's a 54" or a 60".
  20. I

    Price Check -- 2020 bx2380 low hours

    What are they asking for the used 2380?
Top Bottom