Search results

Or too cheap. That is just crazy.

A simple piece of angle iron or u-channel with some velcro or zip ties will work perfectly, just be careful of the wiper seals.

Yup, most likely you just have rusty/corroded balls, detent balls that is. Dissasemble the end cap, clean it out, fill will grease, and drill a small drain hole to allow moisture to escape and you will be good as new.

Changing tires diameters will negatively affect ground clearance and the turning ratio's for the 4wd system.

Femco make a bunch of ROPS for various OEM's, most are folding. They will even do custom work as well. http://www.femcomfg.com/roll-over-protection Some welding shops will make/modify one for you, but most won't due to liability reasons.

Thanks for the referral guys! Those HD round back buckets present a problem for out bolt on hooks, we always recommend welding them onto those style buckets-and yes 1/4" plates are more than adequate.

OK Rick, so you need a "master" switch for your valve-sounds like you have it all figured out ;)

Seat switch.

Rick, you only need to use four of the five terminals: - Goes to ground (this is only for the LED so it can be a small wire. NO (normally open) Goes to your "load" or lights/relay/whatever, as does the + contact. I blew up a picture from my install, you can see the yellow jumper that loops...

Grade 2 or 5 shear bolts are the norm, do you know what grade you have installed now?

A bigger tractor comes with bigger problems, is your trailer big enough? Your truck to tow with? Higher insurance (if you have any)? What about bigger implements? How about need some working capital to work these bigger jobs? You'll need cash or credit to buy materials for any job you get. Not...

https://www.superbrightleds.com/ also sells those style switches: https://www.superbrightleds.com/cat/push-button/ I used three of them on my motorcycle, they are very hard to operate with gloves on!

5/16" grade 70 "transport" chain is the best fit for your tractor IMHO, no need for grade 100 on a BX25. I aggree that straps should not be used to drag anything. Take a look for the new "twist lock" grab hooks that we offer, makes using chains a lot easier is these situations. Also, Lowes has...

You could try the vacuum on the filler trick to try to hold the fluid in, but...If the screen needs cleaning then most likely the fluid is ready for a change anyway.

The "standard" is called ASAE Category 1 Standard S278.6. Here are a few documents on it: http://www.virtual.unal.edu.co/cursos/sedes/medellin/3007073/und_7/pdf/asae_s278.6_enganche_rapido_modificado.pdf...

Cool! That's a great friend!

^^^^^^^^ This! That guy will fix you "rite" up:)

God Speed Mark, that had to be a tough desicion to make! I've been very close to the same decision before with the hook business till I got help, and still have second thoughts about the custom Kubota orders I do since it's so time consuming.

This? http://r2manufacturing.com