Search results

Just HAD to be the LOWER connection, of course..... :( Almost looks like the 'quick connect' connection isn't engaging all the way , though I'm surprised it's leaking. Usually they just 'pop out'(well air line ones here do....) I'd remove the others and refit the bottom one,then the rest...

no, that's what I'd call a 'carryall'....I still use the one I made 20 years ago, out of, ironically, forklift forks. ! they actually make 3PH, forklift masts. Nice for those that need an offroad forklift once in awhile and can't justify the cost of a dedicated machine.

how ? same as a normal forklift...either lift the skid of stuff or fork the loops of the bag !!

maybe install a weaker 'return' spring ?? I think the B2601 series have the same pedal issue ??

TJ 'stole' my idea !!!! yeah, great use for leaky water hoses remember to 'cycle' the 3PH fully up and down, to be SURE the lengths are correct

When the specs for OBD-III came out(years ago.), it was obvious that cops would be able to 'see' who was speeding and then issue them a ticket. Current tech had surpassed that ability....

does the dash light up at all ? do any lights come on ?

One problem with PEX is the temperature rating ! At higher temps, pressure rating goes down. A lot of air compressors today pump up to 155 PSI,so something to consider The other 'fun' fact..... some use the ID and some the OD for selling their PEX. and every connection restricts air flow...

I wonder how often (if ?) rotary cutters actually get washed down ,cleaned out and serviced ? My current riding mower is a 25 years old Cub Cadet (MTD) and it's deck is in VGC. I've seen 5 year old decks rotted out due to wet grass left under the deck.

dang, ..so quick recap... tractor is on flat,level concrete tires are all same air pressure's the same left and right frames same height from ground loader saddles(mounts on tractor) are same height bucket or box is high on the left side with the tractor in the last picture.... measure several...

re: When I short the two prongs on the cable at the sending unit, the gauge goes to full. According to the wiring diagram in the WSM.. That isn't the proper procedure . One of those prongs is the fuel sensor, the other is the 'out of fuel' sensor. To bypass the sensor, you connect the Yellow...

NICE ! My 'cheat' for bearing removal. Find a socket that's just a little smaller in diameter that the outer race (ring) of the bearing,connect to 6" extension. be sure it's flat against the race and whack the extension.Trick is to be SURE the socket IS flat, so every whack the bearing moves out...

my guess based on the last picture is the left side loader frame is 1" too high, or right side is 1" too low. if you can keep the bucket as is, loosen the left frame bolts, it might slide down a bit. If not enough, tighten them, then loosen the right side,then raise frame up a bit. I don't know...

great , more pictures ! I like pictures..makes me think just HOW did they put it together..... the lower , tine shaft I think has to come out. there has to be an 'oil seal' on tine side..so the bearing was installed from that side ? the upper gearbox shaft, same deal. My idea is based on HOW do...

found the WSM, it goes to the 'low fuel light' which is also 'charge' indicator. I presume it might be a thermistor... cooled by fuel so light is off.....no fuel ,it selfheats light comes on ? Overall nothing to do WITH the fuel gauge though....

curious... what's the fixed resistor for ???

One area often overlooked in the 'specs' is the front tire capacity ! The BX23S has tires rated for 700# each, so 1400# total, and that's IF you pump them up to max air pressure rating on the sidewall

and here I thought that hole was to mount a 2" ball to haul trailers here,there ,everywhere.

I don't know the tractor or contract details but..... if the tractor has DPF aka 'emissions' on it.. or some problem 'computer'..... that alone might be worth the deal ?? be interesting to look up some common parts and their cost plus figure labour at $100 per hour ??

Redid the kitchen in 2000 ( clear back to studs...) ,new dishwasher had a recall(bad power supply),got on the 'list' ( of 1,000s.....)3 weeks before Christmas( it'd been MONTHS...) I call, asked gal what can be done cause wife's family of 32 is coming for 'the bird'...I asked if SHE would like...