Search results

Well I got my phone call as you all said I would. Spoke to a super nice lady who went over shipping information. They want to make sure an 18 wheeler will have no problems accessing the delivery address, and they want to verify your tractor PTO HP and they also asked if my tractor was a...

I was looking around online for a place to buy teeth for the WG24. Not a lot of options but I found the following site that sells a tooth specifically for the WG24. Anyone ever used them? Trying to see what my options are for teeth. I ended up not buying extra teeth with the grinder...

I would personally never own a BX tractor. This is just 100% my opinion. If i was going to spend thousands on a tractor, I wouldn't consider anything under a B series. I don't dislike the bx, as it works for many people, but to me, I just cant see spending thousands for essentially a lawn mower...

Hello Psmocko, and welcome to the forums. We see this thread come up a lot - people looking at the B2601 or B2650 and trying to decide whether to go with one of those B's over the L2501. This is also the same decision I had to make in 2019 when I bought my tractor. In most every case I will...

I just looked at the WG24 stump grinder product page again and happened to notice that just in the last couple hours they updated the page to now say " Expected to ship within 3 weeks. " rather than 5 weeks. Maybe that means Ill be getting mine a little sooner :)

Interesting. It seems from the photo like you drove over it. Down here, driving anything more than a lawn mower over a septic tank is a nono. In my backyard for example if I have my tractor back there I take a wide birth around just to not drive over my septic. My septic is flat, but I know...

Yea, a backhoe would simply not work. Counted 75 stumps I need out yesterday, and that was just a quick headcount, there are more than that. Digging out that many stumps would just turn my yard into an absolute mess. I have several areas where like 7 or 8 stumps are all clustered, and in those...

Interesting. I get so many spam and robo calls on my phone I dont answer numbers I dont recognize so I likely will miss the call. Hopefully they leave a message and I can call right back. Thanks for this heads up though.

purposely denting or scratching a new vehicle to me sounds completely stupid, and illogical. That said, scratches on my tractor never bother me. Dents would annoy me a little but Ive never been one to worry about some scratches on a machine that does work. Ive already rubbed off the paint on the...

In that case I would reach out to the dealer for sure given they recently worked on the tires. I have water in my rear tires and Ive never seen even a drop of leakage, and beet juice is thicker than water.

Hey Gibby, welcome to the forum and congrats on that new tractor! It is exciting getting a new piece of equipment. I had the same joy in May 2019 when I got my L2501. I have to say however, I dont know how you guys all order these trators then wait weeks for them to arrive. It would drive me...

dumb question but have you checked the tire pressure on the rear tires? Higher pressure obviously would help with heavy loads, and if the tire is low it would allow more flexing in the sidewall - wether that could or would cause a small leak Im not sure, but I would want to make sure my tires...

Well folks, I just placed my order this morning, 10/19/2020. The product page is now saying "expected to ship in 5 weeks" so it seems they are getting more and more orders. Just 4 or 5 days ago that page said expected to ship in 4 weeks, and when I first looked hard at it about 2 weeks ago I'm...

If the teeth will do 70-100 stumps before needing to be addressed, I might would just buy new teeth rather than mess with sharpening personally. I suspect you would only need to replace the teeth see the most use, so just a handfull of teeth every couple years Id just get new ones. If I were...

Thanks all for those last few replies that is very informative. That would suggest that I may could grind most all the stumps I currently have ( I estimate I have over 60 right now to grind) without having to replace teeth. This is kind of what I was trying to gauge. I think I will just purchase...

The teeth are listed as Carbide steel teeth, so likely the same as you are familiar with. They are $100 for a set of 6 teeth. The grinder takes 34 teeth in total. I had already surmised how the teeth are likely to become dull over time, Im more curious on the time aspect. In other words - are...

Thanks for all the replies. I am aware of the various methods to burn out stumps. I may actually try the diesel method on one this weekend just for the heck of it. If all I had was a handful of stumps scattered around I would do these type of methods and not even consider a stump grinder. I...

I'm glad you shared this. If I had taken advice I got off these forums when considering my disc harrow, I probably wouldn't have gotten it. Some smart folks, who know more about these things than I do told me the disc was too big and too heavy for my tractor, that I wouldn't be able to pull it...

Hey Robinson and welcome to the forums. You are making a decision I myself was making several months ago. I own a year old L2501 and next year I plan to finally put in a good size garden. I will not be doing 2 acres as you are, but the rest of our situation is pretty similar. I was looking at...

Yea I also saw a video somewhere with a Woodland Mills guys talking about their designing of the WG24 and he openly stated their goal was to put a high quality grinder like this in the market at an attainable price, and so he said they shopped around for manufacturers and landed on one in China...