Search results

Yes an aerator will help some with your pond clarity issue but it’s by no means perfect results, Shop on Amazon for a capable pump and kit, hopefully your pond isn’t too deep or you’ll have to get a more expensive pump. I have put aerators in two different ponds and they definitely help. Oh my gosh

You should find your three point arms and attachments next to the battery bolted underneath.

You will need to either call somebody that works on well pumps or post many pictures of your system because there are too many possible scenarios of your system including secondary above ground pressure pumps, put my neighbors well from 160 to 320 deep not fun or easy very difficult and it’s...

I believe I got the cheap ones from Amazon which they stated for my L47, but they were not, way to small. Make sure you check the measurements. Other then that, easy to do, just need to get your toe-in measurements correct when your done.

Hopefully not your first oil change for this machine, Use diesel rated oil and change often what is best for your tractor.

That would be sweet, but 3000 miles away.

I would call your mechanic ASAP tell him/her your situation and how bad the leak is and let them make the determination of how to handle it, just by your pictures appears to be significant leak and where somebody has been wrenching on that nut. Hope it's a quick easy fix.

When I started welding our school only had Stick or Gas, Stick was great for thick metal, 225 amps is really high, with that you would have to move faster. When I see those hardening welds, they are all more the surface only and never pretty, wonder if the type of metals is not happy with each...

Do your U-Tube homework, and if YOU pull your pump I would use the Torque arrester, who knows what had happened to the well or casing on the prementioned well, they are put in for a reason, also the low pressure auto shut-off switches are a great idea, I have seen a couple neighbors burn up...

Mine is a foot wider than my tractor for when you angle it, just be careful when its straight not to hit things.

Any time I trench I put an extra 1" or 3/4" run of PVC in case I need for the future. Do not want to dig that trench again, just cap the ends.

I would test the flow at your well/pump first. Well also could be going dry/bad if that is an issue in your area.

I would have to have more info and see your system, hate to have you do a lot of unnecessary work/trenching, are you sure your pump is not just going bad? Leaks usually show themselves eventually. sounds like your pump at this moment.

Yes, Scammer's offering great deals, "If it sounds to good to be true". I asked for the address for the tractor 1000 miles away, had relatives in the area and the Scammers don't respond.

It would be nice when I am plowing the weeds to have cruise control.

One of my favorite stories to tell the young ones. "Use to coast my minibike with empty 1/4 gallon tank to the pumps, fill it up, give the cashier a dime and get 2 cents back", 32 cents per gallon in the late 60s.

Battery have a full charge?

The pivot bracket is the middle of your front axle, there is a front zerk where you remove a plug bolt to release grease, but the rear zerk dosent accept grease for whatever reason. The auto level keeps the bucket load from falling on you as you lift the FEL, lift the FEL high and you will see...

Use the auto level with the FEL, I have had some large boulders almost come out on top of me when I over tilted when lifting the FEL. Its a BEAST.

Nice, let me know if your rear zerk on the front pivot bracket accepts grease, not the zerk, just seems to not accept any grease.