whitetiger's latest activity
-
whitetiger replied to the thread M5111 auxiliary front work lights.Perhaps this is what you seek and will save you some time. -
whitetiger reacted to North Idaho Wolfman's post in the thread l3450 hydraulic steering orings with
Like.
I was just going to tell you that after reading the first post. Your leak is more likely the rod gasket (seal) than the O-ring. -
whitetiger replied to the thread L3010 GST Shifting Problems.Try turning the steering wheel while raising the loader. Is the steering and or the loader jerking?
-
whitetiger replied to the thread Torque for Fuel Injector in V4000A Engine.Here is page 18 from the V4000 WSM: Nozzle holder, M8 x 1.25, 17.4 to 20.3 ft-lbs
-
-
Have you changed the hydraulic oil recently? If so did you use Kubota super UDT? I have not seen this problem in the L Series but the m...
-
whitetiger replied to the thread Looking for a torque spec for new cutting edge.I am thinking they are grade 5 plow bolts, PLOW BOLT(1/2-13UNC*1 3/4). The torque would be 81-95 ft-lbs.
-
whitetiger replied to the thread Old Kubota Engine.Running at a terrifying approx 350 RPMs.:)
-
whitetiger replied to the thread Shuttle shifter issue?.There are 20 different variations of the M7040, so you will need to be a little more precise. From your description, I suspect your...
-
whitetiger replied to the thread Kubota l3300 starting issues.Connect your meter's negative to a good ground at the starter, and connect the positive lead to the battery post at the starter. What is...
-
whitetiger replied to the thread Fuel gauge and temperature gauges pegging to full fuel and hot after 45 - 60 minutes..Or the harness is worn through or pinched, and both wires are being grounded.
-
whitetiger replied to the thread Kubota B3030 Inner Tie Rod &PS Cylinder Removal.Those joints are lock-tited when assembled. You can safely heat the end of the chrome shaft you want to remove using a handheld propane...
-
whitetiger replied to the thread Kabota KX71-3 losing power as it warms up..I am waiting to see where he got the new ejector bodies from.
-
whitetiger replied to the thread L3901 seat suspension.If I remember correctly, the suspension and seat are from Bostram-Grammer.
-
whitetiger replied to the thread F3080 service manual - OEM.Every Kubota dealer has access to a PDF of the WSM (Workshop Manual) on Kubota Link. Kubota Link is the dealer's portal to Kubota. The...
-
whitetiger replied to the thread B2100 Hydraulic Fluid Leak.The plug part number is 6A100-12180. Yes, it pops right out using a screwdriver, and the new one will need to be pushed or driven in...
